Forum: Cummins into Fords

http://www.tropicalcabines.com.br/adm/arquivos/120394621412.jpg brazilian made http://www.tropicalcabines.com.br/adm/arquivos/12039461612.jpg ...

Novak adapters talks about using chevy bell housing and mating it to a ford np-435. I searched and searched and never saw anyone doing this with the...

Hey everybody I am thinking of finally putting this monster together. looking for real advive please stick to topic if you please. I am a diesel...

I've been working on this conversion for a couple of weeks now and Its Alive and running great! I bought a POS flatbed off a 2 ton that someone cut...

anyone got any good pics of motor mounts for their 4bt in early bronco just looking for ideas

I have a '87-'88 Bread Truck with the retro-fit 4BT that we're going to put into a '92 F250 that has a 351 in it. I'm confused as to which engine...

Howdy. I'm new here and just thought I'd get some input from yall. I'm currently nose deep in my 12v conversion for my superduty. The issue I'm...

I just wanted to make sure a the ford adapter plate would fit my transmission Mazda R5. Does anyone have any input on this?

I have a 79 bronco that I want to put a diesel into. I have not made up my mind on a 6bt or 4bt yet. It seems like a 6bt is easier to get and I can...

I am just beginning to plan this project, and it will probably be about a year before I begin. I like to have a firm plan in place before beginning....

Can anyone tell me whether a ZF 5-speed out of a 1989 F-350 4x4, behind a 460 V8 will work behind a 4BT? I'm guessing the only adapter between them...

im getting ready to start looking for a tranny for my bronco 4bt swap and just had a couple questions to clear some things up im wanting to run a...

I am looking at getting an E350 Van 4X4. But I would like to put a cummins 5.9 B-series mechanical in it. I am not a metal fabricator, but can weld a...

Hi, I'm tired of my gas mpg in my truck high 10mpg and I was thinking of putting a diesel in aka 4bt cummins :). The engine just went so this is...

I've read some conflicting reports on the compatibility of the 45 degree 4BT block mounts from a Ford step van and the stock 300-6 frame stands for a...

ok so i have a 99 superduty with a 5.4 and an automatic and i want to convert it to a 5.9 but im not exactly sure the details of what i want to do,...