Cummins 4BT & Diesel Conversions Forums banner

Reaction score
12

Marketplace Rating
(0.0 - 0 reviews)

Profile posts Latest activity Discussions Buy & Sell Reviews About

  • · Registered
    Joined
    ·
    97 Posts
    hello, i was directed to you from a fellow member, im looking for info on the 3.9 with the intake mounted aftercooler. i need to know what the part number is(are) for the fuel injector lines? i have a monstrous intake horn im going to try and adapt to my engine, and we have come to the conclusion that using those lines will intimately be a necessity.

    he mentioned you might even have a set in a parts pile, that would be great if you are willing to sell them! if not no worries, anyway an information can be found in my build thread, or please ask any questions.

    thanks for any help!

    http://www.4btswaps.com/forum/showthread.php?55394-another-1993-f150-4bt

    · Registered
    Joined
    ·
    27 Posts
    Hey Scott, Do you know the part number for the t19 slave cylinder? mine is leaking a little.

    · Registered
    Joined
    ·
    85 Posts
    Hey Scott. I am looking at adding hydroboost to my Bronco and I will not need the vac/ps unit I currently have. I am wanting to run Hydroboost and PS with a gear driven pump I have been reading a ton on this subject and cannot find a gear driven pump other than the zf pump out of f600's. do you have anything like that or suggestions? my hydro boost is out of a mid 90's Chevy astro van? any help would be great...

    · Registered
    Joined
    ·
    1 Posts
    Can you tell me how much different a aftercooled 6bta cpl600 is from one from a dodge pickup.
    I know there different but is there a way to convert back to dodge style?

    · Registered
    Joined
    ·
    1 Posts
    Hey CrewCab59,
    I have a 65 c10 2wd 1/2ton im looking to put a 6bt in. Can i use any of you mounts youve already made or do you have another solution

    · Registered
    Joined
    ·
    42 Posts
    Still trying to figure out the site... private messages dif. from visitor message? and correction on the turbo HE341*

    · Registered
    Joined
    ·
    42 Posts
    hey scott, im new to the site but i have 17k on my 4bt now. from what i have seen ur the guy to talk to on this site and im looking for a top mount manifold and gasket can u help me out?
    thanks, tyler

    · Registered
    Joined
    ·
    731 Posts
    Scott,
    Does your mid mount A/C kit use the front four holes the lower compressor uses? I'm asking because I have my motor mount bolted up there and am trying to figure out if your kit will work for me.
    Thanks,
    Al

    · Registered
    Joined
    ·
    303 Posts
    Can i use the same crossmember for my 241 Tcase for my new dodge 205 Tcase on my 84 chevy 1ton crew? or do i have to buy one from a dodge or completely build my own? Thanks

    · Registered
    Joined
    ·
    2 Posts
    Do you guys do package deals where I ship the vehicle to you and pay for installation? I'm having trouble finding someone to do it and I don't really have the spare time to do it myself.
    Thanks

    · Registered
    Joined
    ·
    16 Posts
    Scott
    I have some questions about a 4bt performance wise and not finding what I need on here and was hoping you could help. Please give me a call. 615-406-5910
    Thanks
    Jeremy

    · Registered
    Joined
    ·
    303 Posts
    Hey Scott, gotta question and know ur the guy to ask. I'm running an nv4500 dodge behind my cummins and i just purchased a chevy np205 10 spline yesterday and i'm can't seem to find an adapter anywhere. Advanced adapters only make one to the ford np205, do the chevy's not work with the dodge nv4500?? What are my options.. Thanks! Eric

    · Registered
    Joined
    ·
    0 Posts
    Scott, I am new to this board. I recently purchased a very rare 1986 CJ-8 with the steel world cab. The interesting part is the project came with a brand spanking new, still on the crate, 4bt turbo charged motor. I am looking for people to help me put this together. My vision is to make this Jeep look like a factory concept truck by Jeep, Dodge and Cummins. I have lost of questions concerning my engine as it has a handwritten message on it that says recalabraited to 130 hp. I would like to detail the engine and replace the painted over soft parts etc. I would also be interested in your expertise in these motors to help my installation. I know this is some broad open-ended questions but not really sure where to begin to ask questions. A here is a link to my project if you are interested: http://www.cj-8.com/forum/showthread.php?t=28202 I am not sure if you have to have a user account to view pictures or not.

    · Registered
    Joined
    ·
    303 Posts
    Hey Scott, need to order a 6bt conversion kit from you for an 84 1 ton chevy with big block motor mounts. Gimme a call when you get a chance 563-542-5313. Thanks! Eric

    · Registered
    Joined
    ·
    2 Posts
    Hello Scott,

    If you have a moment, I'd like to ask a question. I've recently purchased a 99 24v dodge that seems to be bone stock. I want to put 5" exhuast on it as my first upgrade. (mostly for the sound right now) Are you aware of any writeups on exhuast mods specifically, or could you point me in that direction? I guess I'm curious to know if I'll face any challenges right off, or if this is going to have negative effects on anything if this is the first mod. Any tips or ideas of where to read would be greatly appreciated.
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top