Cummins 4BT & Diesel Conversions Forums banner

What's the VE Pump Banjo Bolt part #?

4K views 6 replies 2 participants last post by  JeepN YJ 
#1 ·
I need to see if you guys can tell me what the part # for the banjo bolt that goes into the cap of the pump, its a 12mm bolt i do know that much. It's the one that goes into the cap for the boost line and runs from there to the head. Sorry if you don't understand what im asking.:beer:
 
#2 ·
thats the return line and theyre matched to the pump at calibration.So bring your cpl #
 
#4 ·
Would anyone happen to know what the thread size is? I think i found something. is it 12mm x 1.25 or 12mm x 1.5? Or neither?
 
#5 ·
Ok I did find it. It's not 12mm it's an 8mm x 1.00. Now where can I find one?
 
#6 ·
No its a 12mm x1.5.Your talking about the boost enrichment line!Your not servicing your truck yourself are you?
 
#7 ·
It's the one that goes into the pump from the afc line connected to the head. It's a 8mm x 1.00 thread. With a 12mm head I believe. And yes I am.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top