FAQ: 4BT Swaps Technical Topics Index-BOOKMARK THIS THREAD FOR FUTURE REFERENCES
4BTSwaps.com is the premier All All Forum on the internet. Registered Users do not see the above ads.
Closed Thread
Results 1 to 11 of 11

Thread: FAQ: 4BT Swaps Technical Topics Index-BOOKMARK THIS THREAD FOR FUTURE REFERENCES

  1. #1
    Super Moderator / Administrator BobS's Avatar
    Join Date
    Jan 2007
    Location
    Paisley, Pa USA
    Posts
    4,154
    Thanks
    16
    Thanked 229 Times in 150 Posts

    Lightbulb FAQ: 4BT Swaps Technical Topics Index-BOOKMARK THIS THREAD FOR FUTURE REFERENCES

    PLEASE BOOKMARK THIS THREAD FOR FUTURE REFERENCES



    Dodge NV4500 hydraulic clutch line adapter fittings:
    https://www.4btswaps.com/forum/showthread.php?t=630 <=Hose Adapters
    https://www.4btswaps.com/forum/showthread.php?t=1231 <=Into Ford
    Last edited by BobS; 08-31-2010 at 05:49 PM.
    Quick reply to this message Reply  

  2. Remove Advertisements
    4BTSwaps.com
    Advertisements
     

  3. #2
    Super Moderator / Administrator BobS's Avatar
    Join Date
    Jan 2007
    Location
    Paisley, Pa USA
    Posts
    4,154
    Thanks
    16
    Thanked 229 Times in 150 Posts

    Default Engine Electrical Topic Index

    Battery, Size and Requirements:
    https://www.4btswaps.com/forum/showthread.php?t=1391
    https://www.4btswaps.com/forum/showthread.php?t=7085

    Electrical, General Wiring Hook-ups, misc:
    https://www.4btswaps.com/forum/showthread.php?t=1273
    https://www.4btswaps.com/forum/showthread.php?26893 <=Fuel shut off solenoids

    Alternator, Dodge:
    https://www.4btswaps.com/forum/showthread.php?t=497
    https://www.4btswaps.com/forum/showthread.php?t=1163
    https://www.4btswaps.com/forum/showth...?t=9223&page=2 <=Wiring up the external regulated Dodge alternator
    https://www.4btswaps.com/forum/showthread.php?27204 <=Adding a TACH terminal to a 2nd gen Dodge alternator

    Alternator, Ford:
    https://www.4btswaps.com/forum/showthread.php?t=2823 <=Hook up wiring

    Alternator, General Motors:
    https://www.4btswaps.com/forum/showthread.php?t=234
    https://www.4btswaps.com/forum/showthread.php?t=398
    https://www.4btswaps.com/forum/showthread.php?t=944 <=Two Wire P30 version
    https://www.4btswaps.com/forum/showthread.php?t=1537
    https://www.4btswaps.com/forum/showthread.php?t=8963 <=Engine will NOT shut off electrically
    https://www.4btswaps.com/forum/showthread.php?t=9605 <=Rebuild kits source GM & others
    https://www.4btswaps.com/forum/showthread.php?15476 <=SI Series Alternator Wiring Explanation

    Computer, ECU:
    https://www.4btswaps.com/forum/showthread.php?t=8123

    Computer, Commonrail
    https://www.4btswaps.com/forum/showthread.php?22366 <=programming the ISB170 computers

    Cruise Control:
    https://www.4btswaps.com/forum/showthread.php?16794 <=GM Cruise Control How-To Info

    Fan, Electric, Adding:
    https://www.4btswaps.com/forum/showthread.php?t=1293
    https://www.4btswaps.com/forum/showthread.php?t=2127 <=NAPA fan switch part number
    https://www.4btswaps.com/forum/showthread.php?t=3655 <=Ford Taurus & reversing direction
    https://www.4btswaps.com/forum/showthread.php?t=5447 <=Fan switch temperature range

    Grid Heater, Electrical Connections & Wiring:
    https://www.4btswaps.com/forum/showthread.php?t=2476
    https://www.4btswaps.com/forum/showthread.php?t=8505 <=Retrofitting
    https://www.4btswaps.com/forum/showthread.php?38362 <=How are your grid heaters hooked up

    Sensors:
    https://www.4btswaps.com/forum/showthread.php?t=1499
    https://www.4btswaps.com/forum/showthread.php?p=55531
    https://www.4btswaps.com/forum/showthread.php?t=9584 <=Thermoswitches, temerature sensing switches & sources
    https://www.4btswaps.com/forum/showthread.php?16510 <=Sensor and Connectors Cross Reference Amp Part Numbers

    Starter, General Information:
    https://4btswaps.com/forum/showthread.php?t=2474 <=Adding a "remote starter"

    Starter, Dodge:
    https://www.4btswaps.com/forum/showthread.php?t=142
    https://www.4btswaps.com/forum/showthread.php?t=401
    https://www.4btswaps.com/forum/showthread.php?t=644
    https://www.4btswaps.com/forum/showthread.php?t=1608 <=Early Dodge Cummins does not interchange with later models
    https://www.4btswaps.com/forum/showthread.php?t=32 <=Dodge Cummins starter part numbers & interchange
    https://www.4btswaps.com/forum/showthread.php?t=4305 <=Starter relay to take load off ignition switch

    Starter, P30:
    https://www.4btswaps.com/forum/showthread.php?t=488 <="Almost Fits but Doesn't"=
    https://www.4btswaps.com/forum/showthread.php?t=657 <=P30 Starter Interchange List
    https://www.4btswaps.com/forum/showthread.php?t=1439 <=Starter Spacer Information
    https://www.4btswaps.com/forum/showthread.php?14283 <= The OTHER ford-starter
    https://www.4btswaps.com/forum/showthread.php?63770 <=7.3 COMPACT Starter on Ford adapter

    Starter, Cummins SAE:
    https://www.4btswaps.com/forum/showthread.php?18594 SAE Starter interchange guide for Ford GM & SAE and-other industrial applications
    https://www.4btswaps.com/forum/showthread.php?95513 <=SAE 2 starter

    Electrical, General Information:
    https://www.4btswaps.com/forum/showthread.php?t=2533 <=Wiring hookups to your chassis information
    https://www.4btswaps.com/forum/showthread.php?t=3885 <=Weather proof connectors
    https://www.4btswaps.com/forum/showthread.php?t=8113 <=95 GM 6.5 accelerator pedal sensor info
    https://www.4btswaps.com/forum/showthread.php?t=10682 <=Aftermarket vehicle wiring kit sources
    Last edited by BobS; 03-08-2017 at 04:18 AM.
    Quick reply to this message Reply  

  4. #3
    Super Moderator / Administrator BobS's Avatar
    Join Date
    Jan 2007
    Location
    Paisley, Pa USA
    Posts
    4,154
    Thanks
    16
    Thanked 229 Times in 150 Posts

    Default Engine, Turbo, Topic Index

    Boost:
    https://www.4btswaps.com/forum/showthread.php?t=724 <=Boost Gauges=
    https://www.4btswaps.com/forum/showthread.php?t=698 <=Boost Numbers=

    Compound Turbos:
    https://www.4btswaps.com/forum/showthread.php?t=735
    https://www.4btswaps.com/forum/showthread.php?t=880
    https://www.4btswaps.com/forum/showthread.php?t=2213 <=Problems running twins
    https://www.4btswaps.com/forum/showthread.php?t=2438
    https://www.4btswaps.com/forum/showthread.php?t=2452

    Compressor Maps:
    https://www.4btswaps.com/forum/showthread.php?t=316

    Garret:
    https://www.4btswaps.com/forum/showthread.php?t=680

    General Information:
    https://www.4btswaps.com/forum/showthread.php?t=50
    https://www.4btswaps.com/forum/showthread.php?t=200
    https://www.4btswaps.com/forum/showthread.php?t=310
    https://www.4btswaps.com/forum/showthread.php?t=470
    https://www.4btswaps.com/forum/showthread.php?t=538
    https://www.4btswaps.com/forum/showthread.php?t=513
    https://www.4btswaps.com/forum/showthread.php?t=664
    https://www.4btswaps.com/forum/showthread.php?t=668
    https://www.4btswaps.com/forum/showthread.php?t=1138 <=Wrecked turbo pics
    https://www.4btswaps.com/forum/showthread.php?t=1284 <=Others
    https://www.4btswaps.com/forum/showthread.php?t=1296 <=Compressor side upgrade part 1
    https://www.4btswaps.com/forum/showthread.php?t=3043 <=Compressor side upgrade part 2
    https://www.4btswaps.com/forum/showthread.php?t=1313 <=Modified mounting location
    https://www.4btswaps.com/forum/showthread.php?t=1387 <=Wastegate issues
    https://www.4btswaps.com/forum/showthread.php?t=1362 <=Determining size
    https://www.4btswaps.com/forum/showthread.php?t=1545 <=HY35 differences by year, 4" pipe
    https://www.4btswaps.com/forum/showthread.php?t=1573
    https://www.4btswaps.com/forum/showthread.php?t=2088 <=HTT upgrade experience
    https://www.4btswaps.com/forum/showthread.php?t=2114 <=Turbo studs
    https://www.4btswaps.com/forum/showthread.php?t=2130 <=Welded waste gate questions
    https://www.4btswaps.com/forum/showthread.php?t=2392 <=Convert the A/R sizing to cm2 for the exhaust housing
    https://www.4btswaps.com/forum/showthread.php?t=2431
    https://www.4btswaps.com/forum/showthread.php?t=2580 <=Noise under load
    https://www.4btswaps.com/forum/showthread.php?t=2936 <=Oil pressure feed line & fittings sizes
    https://www.4btswaps.com/forum/showthread.php?t=2868 <=Body alignment & drain
    https://www.4btswaps.com/forum/showthread.php?t=3051 <=Measuring sizes
    https://www.4btswaps.com/forum/showthread.php?t=3163 <=Convert non turbo 4b to turbo
    https://www.4btswaps.com/forum/showthread.php?t=3722 <=WH1E questions
    https://www.4btswaps.com/forum/showthread.php?t=4559 =Flange dimensions
    https://www.4btswaps.com/forum/showthread.php?t=4617 <=hy35 exhaust housings
    https://www.4btswaps.com/forum/showthread.php?t=4653 <=Low boost questions
    https://www.4btswaps.com/forum/showthread.php?t=5059 <=V-Band clamps and HOSE Connectors
    https://www.4btswaps.com/forum/showthread.php?t=5139 <=Flange questions discussion
    https://www.4btswaps.com/forum/showthread.php?t=6951 <=Info link to the ricers info
    https://www.4btswaps.com/forum/showthread.php?t=7283 <=Replacing pressure side hose
    https://www.4btswaps.com/forum/showthread.php?t=8501 <=Flipping turbo & manifold requirements for oil drain
    https://www.4btswaps.com/forum/showthread.php?t=8730 <=Turbo blanket
    https://www.4btswaps.com/forum/showthread.php?t=8753 <=HE351VG
    https://www.4btswaps.com/forum/showthread.php?t=9452 <=Dodge turbo info links
    https://www.4btswaps.com/forum/showthread.php?t=12866 <=HE351
    https://www.4btswaps.com/forum/showthread.php?13604 <=Turbo housing removal tips
    https://www.4btswaps.com/forum/showthread.php?19004 <=Compact turbo elbow for tight bends pointing down
    https://www.4btswaps.com/forum/showthread.php?61562 <=Understanding Drive Pressure

    Rebuilds:
    https://www.4btswaps.com/forum/showthread.php?t=495
    https://www.4btswaps.com/forum/showthread.php?t=529
    https://www.4btswaps.com/forum/showthread.php?t=2174
    https://www.4btswaps.com/forum/showthread.php?t=4582

    Turbo & Injector Choices:
    https://www.4btswaps.com/forum/showthread.php?t=418
    https://www.4btswaps.com/forum/showthread.php?t=12883 <=choices

    Miscellaneous Info:
    https://www.4btswaps.com/forum/showthread.php?t=11133 HX or HY visual difference
    https://www.4btswaps.com/forum/showthread.php?16805 <=EZ way to put a bead on tubing
    https://www.4btswaps.com/forum/showthread.php?26072 <= General Talk-Turbos
    Last edited by BobS; 08-31-2017 at 08:14 AM.
    Quick reply to this message Reply  

  5. The Following User Says Thank You to BobS For This Useful Post:

    Josh_1969ss (12-19-2013)

  6. Remove Advertisements
    4BTSwaps.com
    Advertisements
     

  7. #4
    Super Moderator / Administrator BobS's Avatar
    Join Date
    Jan 2007
    Location
    Paisley, Pa USA
    Posts
    4,154
    Thanks
    16
    Thanked 229 Times in 150 Posts

    Default ALL Transmissions & Convertors, Adapters, Automatic & Manual, Topic Index

    See the Transmission & Adapters Discussion Section:
    https://www.4btswaps.com/forum/forumdisplay.php?f=22
    Last edited by BobS; 10-27-2009 at 11:54 AM.
    Quick reply to this message Reply  

  8. The Following User Says Thank You to BobS For This Useful Post:

    Josh_1969ss (12-19-2013)

  9. #5
    Quick reply to this message Reply  

  10. The Following User Says Thank You to BobS For This Useful Post:

    Josh_1969ss (12-19-2013)

  11. #6
    Super Moderator / Administrator BobS's Avatar
    Join Date
    Jan 2007
    Location
    Paisley, Pa USA
    Posts
    4,154
    Thanks
    16
    Thanked 229 Times in 150 Posts

    Default Power Steering Pump Index

    https://www.4btswaps.com/forum/showthread.php?t=763 <=Extra return line=
    https://www.4btswaps.com/forum/showthread.php?t=1939 <=Power steering filter
    https://www.4btswaps.com/forum/showthread.php?t=2075 <=Drive gear removal
    https://www.4btswaps.com/forum/showthread.php?t=3799 <=Removing air from the system
    https://www.4btswaps.com/forum/showthread.php?t=5477 <=Reservoirs, remote & sources
    https://www.4btswaps.com/forum/showthread.php?t=6680 <=Hydraulic steering
    https://www.4btswaps.com/forum/showthread.php?13194 <=PS-Pump-Adapter-Housing-Seal Diagram & parts list
    https://www.4btswaps.com/forum/showthread.php?14157 <=Tearing-down-my-Cummins-Saginaw-P-Type-Power-Steering-Pump
    https://www.4btswaps.com/forum/showth...d=1#post166859 Drive gear reinstall
    https://www.4btswaps.com/forum/showth...rsteering-pump <=ISB REAR MOUNTED power steering pump part numbers
    https://www.4btswaps.com/forum/showthread.php?40626 <=Steering pump swapping main fittings
    https://www.4btswaps.com/forum/showthread.php?70826 <=Replace Power Steering Pump

    Some additional references can be found in the "Vacuum Pump Index"
    Last edited by BobS; 05-18-2015 at 05:14 AM.
    Quick reply to this message Reply  

  12. The Following User Says Thank You to BobS For This Useful Post:

    Josh_1969ss (12-19-2013)

  13. #7
    Super Moderator / Administrator BobS's Avatar
    Join Date
    Jan 2007
    Location
    Paisley, Pa USA
    Posts
    4,154
    Thanks
    16
    Thanked 229 Times in 150 Posts
    Last edited by BobS; 07-02-2013 at 04:16 PM.
    Quick reply to this message Reply  

  14. The Following 2 Users Say Thank You to BobS For This Useful Post:

    JB Custom Fab. (09-24-2015), Josh_1969ss (12-19-2013)

  15. #8
    Super Moderator / Administrator BobS's Avatar
    Join Date
    Jan 2007
    Location
    Paisley, Pa USA
    Posts
    4,154
    Thanks
    16
    Thanked 229 Times in 150 Posts

    Default ENGINE TOPIC INDEX - A thru H

    ENGINE TOPICS A thru H:

    3B Cummins, 3 Cylinder Diesel Engines:
    https://www.4btswaps.com/forum/showthread.php?t=5164
    https://www.4btswaps.com/forum/showth...linder-cummins
    https://www.4btswaps.com/forum/showth...666#post367458 <=Pictures

    Abbreviation, Engine Designation:
    https://www.4btswaps.com/forum/showthread.php?t=4755 <=What does 4BT stand for?

    Accessories, Miscellaneous Engine parts, Options, Assorted:
    https://www.4btswaps.com/forum/showthread.php?t=1194
    https://www.4btswaps.com/forum/showthread.php?t=2879 <=Pictures of common options & accessories

    Alcohol, Water Injection:
    https://www.4btswaps.com/forum/showthread.php?t=2680

    Application; 4BT or 6BT, Before you start converting, Getting Started, Selecting;
    Also see "Legal Aspects and Requirements" below ▼:
    https://www.4btswaps.com/forum/showthread.php?t=464
    https://www.4btswaps.com/forum/showthread.php?t=1103
    https://www.4btswaps.com/forum/showthread.php?t=1239
    https://www.4btswaps.com/forum/showthread.php?t=1534
    https://www.4btswaps.com/forum/showthread.php?t=1937
    https://www.4btswaps.com/forum/showthread.php?t=2935 <=Generator set engines, non automotive differences
    https://www.4btswaps.com/forum/showthread.php?t=3158 <=4BT or 4BTA?
    https://www.4btswaps.com/forum/showthread.php?t=4971 <=Choices between a 4BT or 6BT

    Application, 4BT Into an Automobile, Car, Weight, Size, and Highway Safety Issues:
    https://www.4btswaps.com/forum/showthread.php?t=1944
    https://www.4btswaps.com/forum/showthread.php?t=3440
    https://www.4btswaps.com/forum/showthread.php?t=3593
    https://www.4btswaps.com/forum/showthread.php?t=3673
    https://www.4btswaps.com/forum/showthread.php?t=3705
    https://www.4btswaps.com/forum/showthread.php?t=4077
    https://www.4btswaps.com/forum/showthread.php?t=5459
    https://www.4btswaps.com/forum/showthread.php?t=9133

    Application, B Series, Farm & Industrial:
    https://www.4btswaps.com/forum/showthread.php?t=3698 <=Case equipment

    Application as original equipment by manufacturer for highway service:
    https://www.4btswaps.com/forum/showth...Bt-Application

    Availability - New and Rebuilt:
    https://www.4btswaps.com/forum/showthread.php?t=44

    Air Coolers, CAC:
    https://www.4btswaps.com/forum/showthread.php?t=139
    https://www.4btswaps.com/forum/showthread.php?t=202
    https://www.4btswaps.com/forum/showthread.php?t=393
    https://www.4btswaps.com/forum/showthread.php?t=428
    https://www.4btswaps.com/forum/showthread.php?t=415
    https://www.4btswaps.com/forum/showthread.php?t=615
    https://www.4btswaps.com/forum/showthread.php?t=681 <=JWAC ?'s
    https://www.4btswaps.com/forum/showthread.php?t=965
    https://www.4btswaps.com/forum/showthread.php?t=1282
    https://www.4btswaps.com/forum/showthread.php?t=1474 <=CAC part numbers
    https://www.4btswaps.com/forum/showthread.php?t=1836 <=CAC Piping
    https://www.4btswaps.com/forum/showthread.php?t=2285 <=CAC Sources
    https://www.4btswaps.com/forum/showthread.php?t=2609
    https://www.4btswaps.com/forum/showthread.php?t=3358 <=CAC location placement
    https://www.4btswaps.com/forum/showthread.php?15276 <=Sizes, Dodge & others
    https://www.4btswaps.com/forum/showthread.php?16805 <=EZ way to put a bead on tubing
    https://www.4btswaps.com/forum/showthread.php?14824 Adding a Charge Air Cooler

    Balancer, Engine, Counter balancer, Internal rotating type:
    https://www.4btswaps.com/forum/showthread.php?t=1787
    https://www.4btswaps.com/forum/showthread.php?13744

    Balancer, Harmonic:
    See "Dampener" below ▼

    Balancing Engine:
    https://www.4btswaps.com/forum/showthread.php?t=1549

    Barring Tool Front Pulley Home Made:
    https://www.4btswaps.com/forum/showthread.php?56882

    Belt, Tensioner and Mounting Bracket:
    https://www.4btswaps.com/forum/showthread.php?t=1390 <=Pictures
    https://www.4btswaps.com/forum/showthread.php?t=1418 <=Belt slipping on alternator, pictures, NAPA Replacement Tensioner part number
    https://www.4btswaps.com/forum/showthread.php?t=1682 <=Tensioner, amount of movement
    https://www.4btswaps.com/forum/showthread.php?t=2412 <=Noisy
    https://www.4btswaps.com/forum/showthread.php?t=4628 <=Cross references
    https://www.4btswaps.com/forum/showthread.php?15767 <=Serpentine belt size

    Block, Engine:
    https://www.4btswaps.com/forum/showthread.php?t=2708 <=Bellhousing rear mounting pattern, adapters
    https://www.4btswaps.com/forum/showthread.php?t=4063 <=Broken, repairing
    https://www.4btswaps.com/forum/showthread.php?p=33714 <=Rust in cylinders & stuck
    https://www.4btswaps.com/forum/showthread.php?51130 <=China Aluminum 4bt block

    Block Heater, Engine:
    https://www.4btswaps.com/forum/showthread.php?t=2092 <=Removal & replacement
    Also see "Coolant" section below ▼
    https://www.4btswaps.com/forum/showthread.php?p=55531

    Blow by test:
    https://www.4btswaps.com/forum/showthread.php?t=2192

    Blueprint Type Drawing, Measurements, Dimensions, Size:
    https://www.4btswaps.com/forum/showthread.php?t=2532

    Bolts, Nuts, Fasteners, Metric, Replacement Sources:
    https://www.4btswaps.com/forum/showthread.php?t=2141

    Boost Gauge:
    https://www.4btswaps.com/forum/showthread.php?t=4363 <=Where to install on engine

    Camshaft:
    https://www.4btswaps.com/forum/showthread.php?t=592
    https://www.4btswaps.com/forum/showthread.php?t=1382 <=Broken camshaft
    https://www.4btswaps.com/forum/showthread.php?14229 <=4BT-cam-sensor-holder
    https://www.4btswaps.com/forum/showthread.php?17151 <=Cam Journals, HOW MANY BEARINGS? Info also in the SERVICE MANUAL

    Cold Starting, Cold Climates, Cold Weather:
    See "Starting" below ▼

    Compression Testing, Compression PSI & Cylinder Differential Specs:
    https://www.4btswaps.com/forum/showthread.php?t=509
    https://www.4btswaps.com/forum/showthread.php?t=2885

    Connecting Rod Bolt Failure Problem:
    https://www.4btswaps.com/forum/showthread.php?t=165

    Connecting Rod Bearing & Related:
    https://www.4btswaps.com/forum/showthread.php?t=8040

    Coolant, Anti-corrosion:
    https://www.4btswaps.com/forum/showthread.php?t=2719 <=Methods

    Coolant Drain, Engine Block:
    https://www.4btswaps.com/forum/showthread.php?t=608

    Coolant, Heater Hoses:
    https://www.4btswaps.com/forum/showthread.php?27379 <=Molded heater hoses

    Coolant, Miscellaneous Plumbing Supplies:
    https://www.4btswaps.com/forum/showthread.php?t=1194
    https://www.4btswaps.com/forum/showthread.php?14385 <=Source for radiator hose SIZE reducers

    Coolant Pump:
    https://www.4btswaps.com/forum/showthread.php?t=1538 <=Pump part numbers

    Coolant, Radiator, Radiator Hose and Connections, Configurations & Sizes:
    https://www.4btswaps.com/forum/showthread.php?t=581
    https://www.4btswaps.com/forum/showthread.php?t=971
    https://www.4btswaps.com/forum/showthread.php?t=975
    https://www.4btswaps.com/forum/showthread.php?t=1690
    https://www.4btswaps.com/forum/showthread.php?t=2354
    https://www.4btswaps.com/forum/showthread.php?t=2588 <=Radiator size
    https://www.4btswaps.com/forum/showthread.php?t=2602 <=Adapting Radiator connections to hoses
    https://www.4btswaps.com/forum/showthread.php?t=6277 <=Radiators
    https://www.4btswaps.com/forum/showthread.php?t=7382 <=Radiator hose options

    Coolant, Block Heater & Expansion Plugs:
    https://www.4btswaps.com/forum/showthread.php?t=2092 <=Removal
    https://www.4btswaps.com/forum/showthread.php?t=2788 <=Expansion plugs, freeze plugs, soft plugs
    https://www.4btswaps.com/forum/showthread.php?t=2905 <=Powering the block heater & no AC available
    https://www.4btswaps.com/forum/showthread.php?t=3176 <=Leak problem
    https://www.4btswaps.com/forum/showthread.php?p=55531 <=Block heater pic
    https://www.4btswaps.com/forum/showthread.php?t=12071 <=Expansion plug, freeze plugs, soft plugs SIZE
    https://www.4btswaps.com/forum/showthread.php?15698 <=Coolant LEAK through BLOCK CYLINDER WALL
    Coolant, Oil Contaminated:
    https://www.4btswaps.com/forum/showthread.php?t=2240

    Coolant Temperature:
    https://www.4btswaps.com/forum/showthread.php?t=427
    https://www.4btswaps.com/forum/showthread.php?t=9923 <=Overheating

    Coolant Temperature Gauges, Sensors & Switches:
    https://www.4btswaps.com/forum/showthread.php?t=3471
    https://www.4btswaps.com/forum/showthread.php?t=3780
    https://www.4btswaps.com/forum/showthread.php?p=55531

    CPL:
    https://www.4btswaps.com/forum/showthread.php?t=3200 <=What is "CPL"
    https://www.4btswaps.com/forum/showthread.php?t=7255 <=CPL numbers in regard to aftercooling & serial numbers
    https://www.4btswaps.com/forum/showthread.php?16187-cpl <=Determining CPL when the tag is missing

    Crankcase Breather:
    https://www.4btswaps.com/forum/showthread.php?t=11114 <=Filler modification

    Crankshaft Bearings:
    https://www.4btswaps.com/forum/showthread.php?t=813
    https://www.4btswaps.com/forum/showthread.php?t=8342 <=Installing

    Crankshaft, Front and Rear Seals:
    https://www.4btswaps.com/forum/showthread.php?t=620
    https://www.4btswaps.com/forum/showthread.php?t=726
    https://www.4btswaps.com/forum/showthread.php?t=882
    https://www.4btswaps.com/forum/showthread.php?t=1201
    https://www.4btswaps.com/forum/showthread.php?t=2403
    https://www.4btswaps.com/forum/showthread.php?t=3289 <=Rear seal part number
    https://www.4btswaps.com/forum/showthread.php?t=6621 <=Front seal number
    https://www.4btswaps.com/forum/showthread.php?t=7040 <=Rear seal replacement

    Crankshaft Spacer:
    https://www.4btswaps.com/forum/showthread.php?t=8231 <=How do I remove this? HUB
    https://www.4btswaps.com/forum/showthread.php?21587 <=4bt flexplate spacer ring.

    Crankshaft Timing Gear:
    https://www.4btswaps.com/forum/showthread.php?62170 <=Crank Timing Gear Replacement

    Crankshaft, General Information:
    https://www.4btswaps.com/forum/showthread.php?t=3154 <=Regrind, Repair, Replace?

    Cruise Control:
    See "Electrical Section" above

    Cylinder Head Bolts,Fasteners, Stud Kits, Nuts:
    https://www.4btswaps.com/forum/showthread.php?t=5045
    https://www.4btswaps.com/forum/showthread.php?21651 <=Head Bolt Torque Confusion **

    Cylinder Head Crack Repairs:
    https://www.4btswaps.com/forum/showthread.php?t=135

    Cylinder Head Expansion Plugs:
    https://www.4btswaps.com/forum/showthread.php?t=3932 <=Soft plug sizes

    Cylinder Head Gasket:
    https://www.4btswaps.com/forum/showthread.php?t=879
    https://www.4btswaps.com/forum/showthread.php?t=1665 <=How difficult
    https://www.4btswaps.com/forum/showthread.php?t=1993

    Cylinder Head General Information:
    https://www.4btswaps.com/forum/showthread.php?t=875 <=Swap to 4 valve head
    https://www.4btswaps.com/forum/showthread.php?16937 <=4bt blown head gasket & head studs.

    Cylinder Head Swap 16 Valve ISBe to 4BT:
    https://www.4btswaps.com/forum/showth...-Head-on-a-4bt

    Cylinder Head Torque Procedure:
    https://www.4btswaps.com/forum/showthread.php?t=1157
    https://www.4btswaps.com/forum/showthread.php?t=6507
    https://www.4btswaps.com/forum/showthread.php?21651 <=Head Bolt Torque Confusion

    Dampener, Engine mounting, shock absorber style:
    https://www.4btswaps.com/forum/showthread.php?t=1616

    Dampener, Harmonic Balancers & Pulley:
    https://www.4btswaps.com/forum/showthread.php?t=929
    https://www.4btswaps.com/forum/showthread.php?t=1243
    https://www.4btswaps.com/forum/showthread.php?t=8755 <=Aftermarket questions
    https://www.4btswaps.com/forum/showthread.php?t=10428

    Dipstick, Tube length, Location Change, Plastic Tube and Mounting:
    https://www.4btswaps.com/forum/showthread.php?t=1415
    https://www.4btswaps.com/forum/showthread.php?t=1686
    https://www.4btswaps.com/forum/showthread.php?t=1859<=Part numbers

    Efficiency, Engine, RPM ranges:
    See "Mileage"

    Emissions Certification Tag:
    https://www.4btswaps.com/forum/showthread.php?t=1062

    Emissions Requirements:
    See "Legal aspects..." below

    Engine Painting:
    https://www.4btswaps.com/forum/showthread.php?t=121
    https://www.4btswaps.com/forum/showthread.php?t=1463 <=Cummins paint part number

    Engine Repairs:
    https://www.4btswaps.com/forum/showthread.php?t=9649 <=Why multiple repairs should be avoided if possible

    Engine Specifications:
    https://www.4btswaps.com/forum/showthread.php?43178 <=Cummins Engine Specs FROM Cummins

    Engine Stand:
    https://www.4btswaps.com/forum/showthread.php?t=2544 <=Mounting safety
    https://www.4btswaps.com/forum/showthread.php?t=3165 <=Choices

    Exhaust Brake:
    https://www.4btswaps.com/forum/showthread.php?t=973 <=Problems
    https://www.4btswaps.com/forum/showthread.php?t=1174 <=Build your own
    https://www.4btswaps.com/forum/showthread.php?t=4040

    Exhaust Gas Temperature Probe & Gauge, Pyrometer:
    https://www.4btswaps.com/forum/showthread.php?t=262
    https://www.4btswaps.com/forum/showthread.php?t=3391
    https://www.4btswaps.com/forum/showthread.php?t=6330 <=Cruising temps
    https://www.4btswaps.com/forum/showthread.php?t=6346
    https://www.4btswaps.com/forum/showthread.php?t=8678 <=Rate- rise of temperature
    https://www.4btswaps.com/forum/showthread.php?16305 <=Tapping Exhaust Manifold & using particle collector magnets

    Exhaust, General Information:
    https://www.4btswaps.com/forum/showthread.php?t=1065

    Exhaust Header:
    https://www.4btswaps.com/forum/showthread.php?t=553

    Exhaust Manifold, Bolts and General Information:
    https://www.4btswaps.com/forum/showthread.php?t=574
    https://www.4btswaps.com/forum/showthread.php?t=535<=Replacing bolts with studs & sources
    https://www.4btswaps.com/forum/showthread.php?t=1021<=Manifold bolt part number
    https://www.4btswaps.com/forum/showthread.php?t=1848
    https://www.4btswaps.com/forum/showthread.php?t=2114 <=Turbo studs
    https://www.4btswaps.com/forum/showthread.php?t=2336 <=Freeing rusted & broken bolts
    https://www.4btswaps.com/forum/showthread.php?t=3919 <=More broken bolt removal methods
    https://www.4btswaps.com/forum/showthread.php?t=4366 <=Flipping over the exhaust manifold
    https://www.4btswaps.com/forum/showthread.php?t=6375 <=FIRE, Leaking manifold sets vehicle alight

    Exhaust Manifold Paints:
    https://www.4btswaps.com/forum/showthread.php?t=611

    Exhaust Pipe Flange to Turbo Using V-Band Clamp:
    https://www.4btswaps.com/forum/showthread.php?t=1139
    https://www.4btswaps.com/forum/showthread.php?t=1848 <=Adapter
    https://www.4btswaps.com/forum/showthread.php?50474 <=V band clamp data PDF from Eaton

    Exhaust Smoke:
    https://www.4btswaps.com/forum/showthread.php?t=1550 <=Black
    https://www.4btswaps.com/forum/showthread.php?t=3830 <=White on start up

    Exhaust System, Misc Pipes & Mufflers:
    https://www.4btswaps.com/forum/showthread.php?t=1462
    https://www.4btswaps.com/forum/showthread.php?t=1615
    https://www.4btswaps.com/forum/showthread.php?t=2194
    https://www.4btswaps.com/forum/showthread.php?t=2222
    https://www.4btswaps.com/forum/showthread.php?t=2244
    https://www.4btswaps.com/forum/showthread.php?t=5055
    https://www.4btswaps.com/forum/showthread.php?t=6460
    https://www.4btswaps.com/forum/showthread.php?t=6362 <=Some sources
    https://www.4btswaps.com/forum/showthread.php?t=7837 <=Short radius down pipe "cobra"

    Failure Issues, Mechanical, Engine Problems (Also see KDP Killer Dowell Pin below):
    https://www.4btswaps.com/forum/showthread.php?t=9280

    Fan, Electric:
    See the "Electrical" section


    Fan, Hub, Mounting & Bracket:
    https://www.4btswaps.com/forum/showthread.php?t=4039 <=6BT info but can apply to 4BT's

    Fan, Mechanical:
    https://www.4btswaps.com/forum/showthread.php?t=2468
    https://www.4btswaps.com/forum/showthread.php?t=4911 <=Autozone part numbers for 89 P30
    https://www.4btswaps.com/forum/showthread.php?t=6342
    https://www.4btswaps.com/forum/showthread.php?t=8134 <=6BT info but interchanges

    Fan Removal & Tools:
    https://www.4btswaps.com/forum/showthread.php?t=1942 <=6BT (Dodge) fan set up

    Filters, Air:
    https://www.4btswaps.com/forum/showthread.php?t=1283
    https://www.4btswaps.com/forum/showthread.php?t=1856 <=Air filter flow rates
    https://www.4btswaps.com/forum/showthread.php?t=7245 <=Harsh environments

    Filter, Fuel:
    https://www.4btswaps.com/forum/showthread.php?t=180
    https://www.4btswaps.com/forum/showthread.php?t=1698
    https://www.4btswaps.com/forum/showthread.php?t=2296
    https://www.4btswaps.com/forum/showthread.php?t=6888 <=Cummins dual filter adapter
    https://www.4btswaps.com/forum/showthread.php?t=8784 <=Adding filters
    https://www.4btswaps.com/forum/showthread.php?t=10997 <=Dual filters with all parts numbers inc filters
    https://www.4btswaps.com/forum/showthread.php?t=11271 <=Fuel heater above fuel filter, part#'s, eliminate, replace

    Filter, Oil:
    https://www.4btswaps.com/forum/showthread.php?t=2287

    Filter, Oil, Mounting Housing:
    https://4btswaps.com/forum/showthread.php?t=5033

    Filter, Oil, Remote:
    https://www.4btswaps.com/forum/showthread.php?t=351
    https://www.4btswaps.com/forum/showth...hp?t=50&page=6 <=Pic's, part numbers & sources
    https://www.4btswaps.com/forum/showthread.php?t=2432 <=Remote p/n & sources
    https://www.4btswaps.com/forum/showthread.php?25138 <=Cummins Remote Oil Filter Adapter pt#'s
    https://www.4btswaps.com/forum/showthread.php?90417 <=Remote Oil Filter p/n's

    Front Fabricated Engine Mounts:
    See "Mounts" below ▼

    Front OEM Engine Mount for use with SAE Housings:
    https://www.4btswaps.com/forum/showthread.php?t=122

    Fuel Filters and Mounting:
    https://www.4btswaps.com/forum/showthread.php?t=180

    Fuel, General Info, Additives, Grades, Types:
    https://www.4btswaps.com/forum/showthread.php?t=2186<=Waste motor oil
    https://www.4btswaps.com/forum/showthread.php?t=2190
    https://www.4btswaps.com/forum/showthread.php?t=2191

    Fuel Lines, Low Pressure Lift Pump & Return Side, Supply Lines and Tank:
    https://www.4btswaps.com/forum/showthread.php?t=260
    https://www.4btswaps.com/forum/showthread.php?t=1025
    https://www.4btswaps.com/forum/showthread.php?t=1375
    https://www.4btswaps.com/forum/showthread.php?t=1606 <=Running out of fuel, empty tank hazard
    https://www.4btswaps.com/forum/showthread.php?t=2203 <=SAE hose spec numbers
    https://www.4btswaps.com/forum/showthread.php?t=2201 <=Dealing with EFI tanks
    https://www.4btswaps.com/forum/showthread.php?t=2429 <=Hose types & line sizes
    https://www.4btswaps.com/forum/showthread.php?t=3007 <=Larger fuel lines
    https://www.4btswaps.com/forum/showthread.php?t=3060 <=Gasoline tank to diesel
    https://www.4btswaps.com/forum/showthread.php?t=11271 <=Fuel heater above fuel filter, part#'s, eliminate, replace
    https://www.4btswaps.com/forum/showthread.php?16332 <=Fuel filler neck options for diesel pump nozzle
    https://www.4btswaps.com/forum/showthread.php?18436 <= Ran out of fuel and now it won't start. Procedure required for restarting a dry fuel system
    https://www.4btswaps.com/forum/showthread.php?18510 <=Setting up a dual fuel supply & dual tanks
    https://www.4btswaps.com/forum/showthread.php?27530 <=Injector Return Line Copper Washers Pt# & Repairing broken line

    Fuel Pumps, Lift Pumps, Pressure and Gauges:
    https://www.4btswaps.com/forum/showthread.php?t=479
    https://www.4btswaps.com/forum/showthread.php?t=371
    https://www.4btswaps.com/forum/showthread.php?t=1351
    https://www.4btswaps.com/forum/showthread.php?t=1393 <=Walbro Electric Fuel Pump Link
    https://www.4btswaps.com/forum/showthread.php?t=1442 <=Piston type lift pump install & part number
    https://www.4btswaps.com/forum/showthread.php?t=2298 <=Similar to Chevy?
    https://www.4btswaps.com/forum/showthread.php?t=2618 <=Interchange between 4BT & 6BT + sources
    https://www.4btswaps.com/forum/showthread.php?t=3434 <=Piston style lift pump w/ part #'s (2007)
    https://www.4btswaps.com/forum/showthread.php?t=4794 <=Choices & more part numbers (07-2008)
    https://www.4btswaps.com/forum/showthread.php?t=7801 <=Electric pumps
    https://www.4btswaps.com/forum/showthread.php?t=9461 <=More choices & pressures
    https://www.4btswaps.com/forum/showthread.php?t=9438 <=Inlet pressure, vent hole, low mileage failures of new pumps
    https://www.4btswaps.com/forum/showthread.php?t=11833 <=Fuel pressure gauges
    https://www.4btswaps.com/forum/showthread.php?34769 <=High pressure vs Low Pressure physical differences

    Gears, Timing, Gear Case and Mounting Bolts:
    https://www.4btswaps.com/forum/showthread.php?t=1382 <=Broken
    https://www.4btswaps.com/forum/showthread.php?t=1888 <=Timing mark positions with #1 cylinder at TDC (VE Pump)
    https://www.4btswaps.com/forum/showthread.php?t=10257 <=Timing gears, pump, rotating with pump removed
    https://www.4btswaps.com/forum/showthread.php?62170 <=Crank Timing Gear Replacement

    Generator Set Engines:
    https://www.4btswaps.com/forum/showthread.php?t=2935 <=Generator set engines, non automotive differences

    Glow Plugs:
    https://www.4btswaps.com/forum/showthread.php?t=3671 <=Pertains to all Cummins B Series engines
    https://www.4btswaps.com/forum/showthread.php?t=3772

    Grid Heater, Mounting & Related Intake Parts:
    https://www.4btswaps.com/forum/showthread.php?t=2469
    https://www.4btswaps.com/forum/showthread.php?t=2476 <=Wiring diagram (push button)
    https://www.4btswaps.com/forum/showthread.php?t=8505 Retrofit, adapting
    https://www.4btswaps.com/forum/showthread.php?38362 <=Grid heater hook ups

    Head:
    See Cylinder Head /\

    Heater Hose Connections to Engine:
    https://www.4btswaps.com/forum/showthread.php?t=425
    https://www.4btswaps.com/forum/showthread.php?t=1192
    https://www.4btswaps.com/forum/showthread.php?p=55531

    History of the "B" Series Cummins Engine:
    https://4btswaps.com/forum/showthread.php?t=1206
    https://www.4btswaps.com/forum/showthread.php?t=9691
    https://www.4btswaps.com/forum/showthread.php?19645 <=Happy birthday to the B-series Engine July 1st!!!!

    Hose, Radiator:
    "See "Coolant Section" above
    Last edited by BobS; 01-25-2018 at 05:11 AM. Reason: Added a link..
    Quick reply to this message Reply  

  16. The Following User Says Thank You to BobS For This Useful Post:

    Josh_1969ss (12-19-2013)

  17. #9
    Super Moderator / Administrator BobS's Avatar
    Join Date
    Jan 2007
    Location
    Paisley, Pa USA
    Posts
    4,154
    Thanks
    16
    Thanked 229 Times in 150 Posts

    Default ENGINE TOPIC INDEX - I thru Q

    ENGINE TOPICS I thru Q:

    Identification & Application:
    https://www.4btswaps.com/forum/showthread.php?t=110
    https://www.4btswaps.com/forum/showthread.php?t=295
    https://www.4btswaps.com/forum/showthread.php?t=536
    https://www.4btswaps.com/forum/showthread.php?t=917
    https://www.4btswaps.com/forum/showthread.php?t=7960 <=Engine "Data Plate" location

    Idle, Extended Time, Prolonged:
    https://www.4btswaps.com/forum/showthread.php?t=3296

    Idle Problems & causes:
    https://www.4btswaps.com/forum/showthread.php?13501

    Injection Pump, Inline A Pump, General Information:
    https://www.4btswaps.com/forum/showthread.php?t=789
    https://www.4btswaps.com/forum/showthread.php?t=6456

    Injection Pump, Lucas CAV:

    https://www.4btswaps.com/forum/showthread.php?t=11574

    Injection Pump, P7100
    https://www.4btswaps.com/forum/showth...ith-P7100-info
    https://www.4btswaps.com/forum/showthread.php?6887 <=Pictures & pump questions

    Injection Pump, VE, General Information:
    https://www.4btswaps.com/forum/showthread.php?t=2189
    https://www.4btswaps.com/forum/showthread.php?t=2440 <=AFC diaphragm & pin removal
    https://www.4btswaps.com/forum/showthread.php?t=167 <=P Pump conversion
    https://www.4btswaps.com/forum/showthread.php?t=2662 <=Adjustments and power settings
    https://www.4btswaps.com/forum/showthread.php?t=3297 <=14 MM head & plunger
    https://www.4btswaps.com/forum/showthread.php?t=3447 <=Cycling miss under load problems
    https://www.4btswaps.com/forum/showthread.php?t=4424 <=Fuel pin, after market & ground
    https://www.4btswaps.com/forum/showthread.php?t=4592 <=Pump swap VE to P
    https://www.4btswaps.com/forum/showthread.php?t=5425 <= VE vs P pump differences
    https://www.4btswaps.com/forum/showthread.php?t=7301 <=Bad cam plate & hard to start
    https://www.4btswaps.com/forum/showthread.php?t=8439 <=Maladjusted pump symptoms & corrections
    https://www.4btswaps.com/forum/showthread.php?t=8963 <=Shutdown Solenoid has power with key off & no shutdown
    https://www.4btswaps.com/forum/showthread.php?t=8928 <=High idle, timing, adjustments
    https://www.4btswaps.com/forum/showthread.php?t=9267 <=Throttle cable set-ups, custom lengths, suppliers
    https://www.4btswaps.com/forum/showthread.php?t=10169 <=Fuel pin follower stuck
    https://www.4btswaps.com/forum/showthread.php?16609 <=3800 RPM governor spring installed and now it won't start
    https://www.4btswaps.com/forum/showthread.php?18436 <=Ran out of fuel, repriming fuel system
    https://www.4btswaps.com/forum/showthread.php?8124 <=Injection Pump ID numbers
    https://www.4btswaps.com/forum/showthread.php?21454 <=Bummer no start, camplate re-installed 180 deg out of time
    https://www.4btswaps.com/forum/showthread.php?21759 <=VE pump manual shutoff doesn't work
    https://www.4btswaps.com/forum/showthread.php?22316 <=EZ way to purge injector lines
    https://www.4btswaps.com/forum/showthread.php?22990 <=Instructions ve-pump removal procedure
    https://www.4btswaps.com/forum/showthread.php?24994 <=VE performance internal Parts and numbers
    Injection Pump Governor:
    https://www.4btswaps.com/forum/showthread.php?t=589 <=Governor differences fixed speed & automotive
    https://www.4btswaps.com/forum/showthread.php?t=1457 <="366" 3200 RPM Gov Spring
    https://www.4btswaps.com/forum/showthread.php?t=2064 <=4000 RPM Gov Spring
    https://www.4btswaps.com/forum/showthread.php?t=3082 <=Governor spring install tips
    https://www.4btswaps.com/forum/showthread.php?t=4581 <=Governor spring install tips & pics
    https://www.4btswaps.com/forum/showthread.php?t=9125 <="Phase II pump" info
    https://www.4btswaps.com/forum/showthread.php?t=12416 <=Governor spring part numbers,for RPM:2800,3200,3800, & 4200
    https://www.4btswaps.com/forum/showthread.php?26893 <=Fuel shut of solenoids
    https://www.4btswaps.com/forum/showthread.php?27069 <-14mm head 4mm camplate

    Injection Pump, KSB:
    https://www.4btswaps.com/forum/showthread.php?t=3891 <=Wiring
    https://www.4btswaps.com/forum/showthread.php?t=8170 <=Theory & operation
    https://www.4btswaps.com/forum/showthread.php?t=11297 <=Identification of the two models
    https://www.4btswaps.com/forum/showthread.php?14648 <=Leaky-KSB FIX

    Injection Pump, Removing:
    https://www.4btswaps.com/forum/showth...4903#post14903
    https://www.4btswaps.com/forum/showthread.php?t=4031

    Injection Pump Timing and Effects:
    https://www.4btswaps.com/forum/showthread.php?t=1443
    https://www.4btswaps.com/forum/showthread.php?t=1959
    https://www.4btswaps.com/forum/showthread.php?t=2078
    https://www.4btswaps.com/forum/showthread.php?t=6849
    https://www.4btswaps.com/forum/showthread.php?t=10257 <=Timing gears, pump, rotating with pump removed
    https://www.4btswaps.com/forum/showthread.php?47290 <=VE pump timing specs by CPL

    Injection Pump Operation:
    https://www.4btswaps.com/forum/showthread.php?52202 <=How Inline Injection Pumps Work

    Injection Pump Tools & Wrenches:
    https://www.4btswaps.com/forum/showth...?t=1430&page=2 <=Injection pump wrench

    Injectors, Fuel:
    https://www.4btswaps.com/forum/showthread.php?t=364
    https://www.4btswaps.com/forum/showthread.php?t=1303 <=Differences 7mm and 9mm
    https://www.4btswaps.com/forum/showthread.php?t=2209 <=Flow test
    https://www.4btswaps.com/forum/showthread.php?t=2387 <=Choices, differences between P & VE versions
    https://www.4btswaps.com/forum/showthread.php?t=3554 <=Injector cleaning
    https://www.4btswaps.com/forum/showthread.php?t=3601 <=Removal procedure
    https://www.4btswaps.com/forum/showthread.php?t=6774 <=Injector sealing washers
    https://www.4btswaps.com/forum/showthread.php?t=8168 <=190's and 185's discussion
    https://www.4btswaps.com/forum/showthread.php?t=9153 <=More on removal procedures
    https://www.4btswaps.com/forum/showthread.php?t=9183 <=7mm Vs 9mm injectors & adapters pictures

    Injector, Testers, Tools & Wrenches:
    https://www.4btswaps.com/forum/showthread.php?t=1773 <=Do-It-Yourself removal tool, puller, no welding required
    https://www.4btswaps.com/forum/showthread.php?t=5187 <=Do-It-Yourself diesel injector pop tester


    Installation Considerations:
    https://www.4btswaps.com/forum/showthread.php?t=85
    https://www.4btswaps.com/forum/showthread.php?22547 <=Installing guide

    Intake System, Air, Pre & Post Turbo, Hoses & Tubing:
    Also see "Air Coolers" above ▲
    https://www.4btswaps.com/forum/showthread.php?t=1283
    https://www.4btswaps.com/forum/showthread.php?t=2253
    https://www.4btswaps.com/forum/showthread.php?t=2403 <=Bigger
    https://www.4btswaps.com/forum/showthread.php?t=2469
    https://www.4btswaps.com/forum/showthread.php?t=2690 <=Intake brake question
    https://www.4btswaps.com/forum/showthread.php?t=2848 <=Intake cover part#'s
    https://www.4btswaps.com/forum/showthread.php?t=3053 <=Cold air intake
    https://www.4btswaps.com/forum/showthread.php?t=3136 <=Silicone hoses & sources
    https://www.4btswaps.com/forum/showthread.php?t=6362

    Killer Dowel Pin - KDP:
    https://www.4btswaps.com/forum/showthread.php?t=215
    https://www.4btswaps.com/forum/showthread.php?t=936
    https://www.4btswaps.com/forum/showthread.php?t=1382
    https://www.4btswaps.com/forum/showthread.php?t=2208
    https://www.4btswaps.com/forum/showthread.php?t=5483 <=Cummins notes problem & their fix

    Kits, Engine Rebuilding:
    https://www.4btswaps.com/forum/showthread.php?t=1044

    Knocking after engine rebuild:
    https://www.4btswaps.com/forum/showthread.php?19266 <=knock-knock-knock?

    Legal Aspects and Requirements can vary state by state:
    https://www.4btswaps.com/forum/showthread.php?t=464
    https://www.4btswaps.com/forum/showthread.php?t=1668
    https://www.4btswaps.com/forum/showthread.php?t=2329 <=Federal Emissions & chassis restrictions
    https://www.4btswaps.com/forum/showthread.php?t=2641
    https://www.4btswaps.com/forum/showthread.php?t=3212

    Lift Pump:
    See "Fuel Pump" section above ▲

    Manuals, Operating, Service, Shop, Repair, Publications, Cummins:
    https://www.4btswaps.com/forum/showthread.php?t=1808

    Measurements:
    See "Blueprint" section above ▲

    Mileage, MPG's, RPM ranges, Proper Methods for Checking Diesel MPG,:
    https://www.4btswaps.com/forum/showthread.php?t=602
    https://www.4btswaps.com/forum/showthread.php?t=1180
    https://www.4btswaps.com/forum/showthread.php?t=1300
    https://www.4btswaps.com/forum/showthread.php?t=1620
    https://www.4btswaps.com/forum/showthread.php?t=1937 <=4BT & 6BT comparisons
    https://www.4btswaps.com/forum/showthread.php?t=3058 <=Miles per $

    Mounts, Mounting, Engine & Frame Brackets, Motor Mounts, Fabricated, Engine Supports:
    https://www.4btswaps.com/forum/showthread.php?t=26 <="Show off your Mounts" picture thread of motor mounts
    https://www.4btswaps.com/forum/showthread.php?t=2100 <=New Substitutes for "liquid filled mounts"
    https://www.4btswaps.com/forum/showthread.php?t=6018
    https://www.4btswaps.com/forum/showthread.php?t=9236 <=Engine positioning and locating in regard to the frame
    https://www.4btswaps.com/forum/showthread.php?t=12675 <=Which factory Ford chassis brackets stand fit
    https://www.4btswaps.com/forum/showthread.php?26692 <=Motor mounts a quick survey

    Mounts, Front, P30 Chassis, Ford & GM Chassis:
    https://www.4btswaps.com/forum/showthread.php?t=1274 <=Ford info
    https://www.4btswaps.com/forum/showthread.php?t=6166 <=P30 fluid mounts part#
    https://www.4btswaps.com/forum/showthread.php?t=12675 <=Ford mounting with Ford & van parts info

    Noise, Dealing With Methods to Reduce Noise, Insulation for Noise Reduction:
    https://www.4btswaps.com/forum/showthread.php?t=448
    https://www.4btswaps.com/forum/showthread.php?t=1270 <=Sump
    https://www.4btswaps.com/forum/showthread.php?t=4074

    Oil Cooler Assembly:
    https://www.4btswaps.com/forum/showthread.php?t=958

    Oil Cooler Gasket:
    https://www.4btswaps.com/forum/showthread.php?27055 <=Which cooler gasket?

    Oil Cooler Remote:
    https://www.4btswaps.com/forum/showthread.php?t=3660

    Oil Capacity:
    https://www.4btswaps.com/forum/showthread.php?t=514

    Oil Fillers, Eliminators, Block Side Filler Plug, etc:
    https://www.4btswaps.com/forum/showthread.php?t=1030 <=Blocking side filler hole plug
    https://www.4btswaps.com/forum/showthread.php?t=3117 <=Oil filler, block side mounted filler cap

    Oil Filter, Remote:
    See: Filter, Oil, Remote above ▲

    Oil in Coolant:
    https://www.4btswaps.com/forum/showthread.php?t=2240
    https://www.4btswaps.com/forum/showthread.php?15698

    Oil Pan Related:
    https://www.4btswaps.com/forum/showthread.php?t=1656<=Pics & mods
    https://www.4btswaps.com/forum/showthread.php?t=1778 <=Dry sump discussion
    https://www.4btswaps.com/forum/showthread.php?t=3379 <=Reversing oil pan, front sump pick up part #
    https://www.4btswaps.com/forum/showthread.php?25293 <=4B Series Oil Pans, Center Front & Rear Sump Pics w/part numbers

    Oil Pressure Regulator:
    https://www.4btswaps.com/forum/showthread.php?27255 <-Alternate oil pressure regulator gasket Part#

    Oil Pressure Sender Switch:
    https://www.4btswaps.com/forum/showthread.php?t=250
    https://www.4btswaps.com/forum/showthread.php?t=331

    Oil Pressure Tap, Port, Connection for gauge:
    https://www.4btswaps.com/forum/showthread.php?t=324
    https://www.4btswaps.com/forum/showthread.php?t=798
    https://www.4btswaps.com/forum/showthread.php?t=1624
    https://www.4btswaps.com/forum/showthread.php?t=2165
    https://www.4btswaps.com/forum/showthread.php?p=55531

    Oil Pressure, Misc:
    https://www.4btswaps.com/forum/showthread.php?t=3226 <=No oil pressure while cranking starter & prelubing
    https://www.4btswaps.com/forum/showthread.php?t=9965 <=No oil pressure after engine rebuild
    https://www.4btswaps.com/forum/showthread.php?27202 <=No oil pressure after engine rebuild

    Oil Pump Pick up tube Part Numbers:
    https://www.4btswaps.com/forum/showthread.php?t=349
    https://www.4btswaps.com/forum/showthread.php?t=1946

    Oil Type - Diesel Service:
    https://www.4btswaps.com/forum/showthread.php?t=52
    https://www.4btswaps.com/forum/showthread.php?t=357

    Operating at High Elevations, Thin Air Effects (non aeronautical):
    https://www.4btswaps.com/forum/showthread.php?t=1118
    https://www.4btswaps.com/forum/showthread.php?t=5634

    Pistons, General Info, Interchange, etc:
    https://www.4btswaps.com/forum/showthread.php?t=8406
    https://www.4btswaps.com/forum/showthread.php?31033 <=Piston position install offset bowls

    Piston, Oil Cooling Nozzles & Problems:
    https://www.4btswaps.com/forum/showthread.php?t=2287
    https://www.4btswaps.com/forum/showthread.php?t=3298 <=Plugged from broken oil filter
    https://www.4btswaps.com/forum/showthread.php?t=5405 <=Nozzle part numbers
    https://www.4btswaps.com/forum/showthread.php?15613 <=Nozzle locations
    Power, Horsepower & torque curve graphs for a 4bt:
    https://www.4btswaps.com/forum/showthread.php?t=11068

    Power, Increasing, Run-a-way Engine, Smoke:
    https://www.4btswaps.com/forum/showthread.php?t=1323
    https://www.4btswaps.com/forum/showthread.php?t=2414

    Propane Injection:
    https://www.4btswaps.com/forum/showthread.php?t=818

    Publications, Cummins, Manuals, Operation, Maintenance, Service, Troubleshooting, Parts Lists:
    https://www.4btswaps.com/forum/showthread.php?t=32
    https://www.4btswaps.com/forum/showthread.php?t=1808

    Pyrometer:
    See "Exhaust Gas Temperature Probe & Gauge, Pyrometer" above ▲
    Last edited by BobS; 07-09-2014 at 09:05 AM. Reason: Ongoing updates....
    Quick reply to this message Reply  

  18. The Following User Says Thank You to BobS For This Useful Post:

    JB Custom Fab. (09-24-2015)

  19. #10
    Super Moderator / Administrator BobS's Avatar
    Join Date
    Jan 2007
    Location
    Paisley, Pa USA
    Posts
    4,154
    Thanks
    16
    Thanked 229 Times in 150 Posts

    Default ENGINE TOPIC INDEX - R thru Z

    ENGINE TOPICS R thru Z:

    Radiator:
    See "Coolant" /\

    Rebuild:
    https://www.4btswaps.com/forum/showthread.php?t=276
    https://www.4btswaps.com/forum/showthread.php?t=2427
    https://www.4btswaps.com/forum/showthread.php?t=3197 <=Cost to rebuild a core engine

    Removal from the Step Van:
    https://www.4btswaps.com/forum/showthread.php?t=195

    Repairs, Engine:
    https://www.4btswaps.com/forum/showthread.php?t=9649 <=Why multiple repairs should be avoided if possible

    Starter, Air, Pneumatic:
    https://www.4btswaps.com/forum/showthread.php?t=2541

    Starter, Electrical:
    See "Engine Electrical" section below ▼

    Starting, Cold Climates:
    https://www.4btswaps.com/forum/showthread.php?t=1222
    https://www.4btswaps.com/forum/showthread.php?t=2087
    https://www.4btswaps.com/forum/showthread.php?t=2673 <=Ether as a starting aid
    https://www.4btswaps.com/forum/showthread.php?t=2905 <=Powering the block heater & no AC available

    Starting Difficulties:
    https://www.4btswaps.com/forum/showthread.php?t=1000 <=Hard to start after setting overnight
    https://www.4btswaps.com/forum/showthread.php?t=1262 <=Starter fails to turn
    https://www.4btswaps.com/forum/showthread.php?t=2584 <=Hard to restart & troubleshooting
    https://www.4btswaps.com/forum/showthread.php?t=5454 <=Will not start & ran out of fuel
    https://www.4btswaps.com/forum/showthread.php?t=7190 <=Contaminated fuel symptoms & testing
    https://www.4btswaps.com/forum/showthread.php?t=7301 <=Bad IP cam plate & rollers
    https://www.4btswaps.com/forum/showthread.php?13242 <=Hard to start using ign switch.
    Stud Kits:
    https://www.4btswaps.com/forum/showthread.php?t=1058

    Tachometer:
    https://www.4btswaps.com/forum/showthread.php?t=252
    https://www.4btswaps.com/forum/showthread.php?t=360
    https://www.4btswaps.com/forum/showthread.php?t=1159 <=Low speed fluctuations
    https://www.4btswaps.com/forum/showthread.php?t=1911 <=Tach sensors
    https://www.4btswaps.com/forum/showthread.php?t=3642 <=Gear drive adapter
    https://www.4btswaps.com/forum/showthread.php?t=4578 <=CS144 sensing
    https://www.4btswaps.com/forum/showthread.php?t=4826 <=Recalibrating
    https://www.4btswaps.com/forum/showthread.php?t=8121 <=New Tiny Tach improved
    https://www.4btswaps.com/forum/showthread.php?20463 <=Using a factory tach & going from a modular 5.4 V8 to a 4BT or 6BT
    https://www.4btswaps.com/forum/showthread.php?24625 <=get your tach to work w/stock 12 valve CPS crank position sensor


    Thermostat:
    https://www.4btswaps.com/forum/showthread.php?t=128
    https://www.4btswaps.com/forum/showthread.php?t=1480
    https://www.4btswaps.com/forum/showthread.php?t=4916 <=New Cummins styles 07/2008

    Throttle Linkage Set Ups:
    https://www.4btswaps.com/forum/showthread.php?t=1422
    https://www.4btswaps.com/forum/showthread.php?t=4310
    https://www.4btswaps.com/forum/showthread.php?t=7895 <=Throttle cable length, longer, & sources
    https://www.4btswaps.com/forum/showthread.php?19472 <=Manual throttle for the VE IP

    Thrust Bearing Problem & Replacement:
    https://www.4btswaps.com/forum/showthread.php?t=198

    Tilting the Engine Front to Rear and in Relationship to Drive Line Angles :
    https://www.4btswaps.com/forum/showthread.php?t=3367

    Tilting the Engine or Transmission Issues:
    https://www.4btswaps.com/forum/showthread.php?t=618

    Timing Case Retaining Bolts Problem:
    https://www.4btswaps.com/forum/showthread.php?t=1382

    Timing Pin:
    https://www.4btswaps.com/forum/showthread.php?t=2770

    Top Dead Center, Rotating Engine by Hand:
    https://www.4btswaps.com/forum/showthread.php?t=336
    https://www.4btswaps.com/forum/showthread.php?t=1888<=Timing marks TDC
    https://www.4btswaps.com/forum/showthread.php?t=4793 <=Home brew engine turning tool

    Valves, Lash & Adjusting:
    https://www.4btswaps.com/forum/showthread.php?t=8851
    https://www.4btswaps.com/forum/showthread.php?17206

    Valve Covers & Gaskets:
    https://www.4btswaps.com/forum/showthread.php?t=976

    Valve Lash, Clearance Gap Specs and Adjustment Procedure:
    https://www.4btswaps.com/forum/showthread.php?t=1057
    https://www.4btswaps.com/forum/showthread.php?17206

    Valve Seals:
    https://www.4btswaps.com/forum/showthread.php?28905 <=Umbrella style valve seals

    Venting:
    https://www.4btswaps.com/forum/showthread.php?t=11114

    Vibrations:
    SEE Dampener, Harmonic Balancers & Pulley above/\

    Water Pump:
    https://www.4btswaps.com/forum/showthread.php?t=1538 <=Part numbers & interchange

    Weight, 4BT Engine:
    https://www.4btswaps.com/forum/showthread.php?t=1558

    Weight, 6BT Engine:
    https://www.4btswaps.com/forum/showthread.php?t=1855

    Wiring Connections & Hook Ups:
    See "Engine Electrical" section
    Last edited by BobS; 09-03-2013 at 04:36 AM.
    Quick reply to this message Reply  

  20. #11
    Super Moderator / Administrator BobS's Avatar
    Join Date
    Jan 2007
    Location
    Paisley, Pa USA
    Posts
    4,154
    Thanks
    16
    Thanked 229 Times in 150 Posts
    Quick reply to this message Reply  

  21. The Following 2 Users Say Thank You to BobS For This Useful Post:

    Biggsyj (08-31-2015), Russ McLean (08-31-2015)

Closed Thread

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Where you live:

Please enter your real name for our records:

Log-in

Tags for this Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •