Cummins 4BT & Diesel Conversions Forums banner

Search results

1-20 of 459 Results
Advanced Search
  1. my Jeep xj cherokee 4bd1t diesel repower 4bd1t

    Isuzu 4BD1T/2T
    With a stock engine you will be fine, much more than that and the 700r4 wouldn't be my first option or even a 5th. The stock stall works well or close to it. My 67 F100 was getting 32mpg city 34hwy with a stock 4bd1t (had an he341 turbo and turned up pump) with a rebuilt 700r4 and slightly lower...
  2. Isuzu 4BD engine to transmission adapters

    Misc Stuff For Sale
    Yes I do still have some. I'll give you a call.
  3. our old friend

    Isuzu 4BD1T/2T
    It will be an expedition type vehicle big power not needed, now lowest possible COG while making it 4WD and building my own pop top is ambitious :D You should know I can't do anything half ass Josh. I took the original jeep flywheel and removed the ring gear then cut out the center and welded...
  4. our old friend

    Isuzu 4BD1T/2T
    Glad to be back everyone, its been a rough past year. Way too many crazy things have happened and life has been turned upside down but its finally over and things are much better now. I hope to be around a lot more in the future. I never did get around to finishing the build thread on the jeep...
  5. Isuzu 4BD engine to transmission adapters

    Misc Stuff For Sale
    I have a few FORD and a couple chevy adapters left over I'd like to get rid of. These adapters bolt to the isuzu diesel engines and allow you to bolt up chevy transmissions or the ford small block transmissions (anything that came behind a ford 302/351 engine). These are NOT for the cummins...
  6. our old friend

    Isuzu 4BD1T/2T
    They are roughly 100% over stock injectors. :)
  7. Why I've been absent lately, update about kits

    Isuzu 4BD1T/2T
    I don't drink. That would be my ex wife hacking into my online accounts and posting bs. She is very pathetic and can't leave me alone. It's why I've basically fallen off the Internet, she's crazy like a stalker!
  8. Why I've been absent lately, update about kits

    Isuzu 4BD1T/2T
    :D Thanks Josh. I'll be fine just wanted to let folks know about the kits without spilling too much of my drama on the board (I really dont like drama at all!) I've actually been keeping a positive attitude about all this even looking at land and building a small house for myself and my...
  9. Why I've been absent lately, update about kits

    Isuzu 4BD1T/2T
    Hi guys, I figured I'd post this here since its the isuzu section. Sorry I've been outta contact alot lately I came home from being gone for 2 1/2 months on buisness and found an empty house and am now going through a divorce. Currently I have 1 chevy kit and will be waiting on a new batch to...
  10. Isuzu manual flywheel replacement

    Isuzu 4BD1T/2T
    I've been working on a custom flywheel for a few months now since its getting harder and harder to find actual isuzu manual flywheels. I've come up with some very nice flywheels but also very cost prohibitive. I've been triyng to find a cheaper alternative when it suddenly hit me. A simple fix...
  11. Isuzu manual flywheel replacement

    Vendor Showcase
    I've been working on a custom flywheel for a few months now since its getting harder and harder to find actual isuzu manual flywheels. I've come up with some very nice flywheels but also very cost prohibitive. I've been triyng to find a cheaper alternative when it suddenly hit me. A simple fix...
  12. 1997 and up F150 a possible isuzu diesel candidate?

    Isuzu 4BD1T/2T
    The 4.2L V6 that comes in the newer F150's has the same 302 style bellhousing bolt pattern that our ford kit uses. It will bolt in place although you may have to play with your throwout bearing spacing but thats no big deal if you're putting a diesel into a half ton anyway. The V8 modular...
  13. Zombie Apocalypse Survival Vehicle

    General Discussion
    Where in TX are you I live in Burleson and find them regularly. Just picked up a 96 F250 with very low miles on it for my dad a few months ago, already have a low mileage 6bt P pumped and built tranny ready to go in when I get home. Were building him a dead reliable super clean cruiser so he...
  14. Zombie Apocalypse Survival Vehicle

    General Discussion
    With those axles and tire sizes as well as wanting a crew cab you're looking at 7500LBS + worth of truck I'd definately look at nothing less than a 6bt engine for economy and power. I wouldnt consider a dodge a reliable vehicle even for daily use let alone zombie killin status. I'd get a 93-97...
  15. Hy35w npr

    Isuzu 4BD1T/2T
    The 40mm would work fine for you but The V ban flange on the 50mm is much nicer and they way I'll be going for the next major build on the AWD chassis for the ford.
  16. Higher amp alternator for 4BD1T ???

    Isuzu 4BD1T/2T
    I considered rewinding the stock alternator but after getting a couple very rough estimates and thinking about having a custom alternator that I couldnt get "on the road" somewhere I decided against it and just went with one of the most popular alternators ever made thats much much cheaper from...
  17. Engine stand

    Tool & Shop Talk!
    Got it off ebay of all places (I dont like ebay) I did alot of research and 40-60:1 seems like the perfect ratio, make sure its a worm gear nothing else. Just because its a gear reduction box doesnt mean its a worm gear box, with a worm gear box it can't just free spin on ya. I paid $65 shipped...
  18. Engine stand

    Tool & Shop Talk!
    I'll be making my own when I get home out of 1/4" 2 x 4 steel some very heavy duty casters. Wife told me my brand new 60:1 worm gear reduction box arrived last week along with the bearings and 1.5" solid steel shaft, should make any engine I'll ever mess with easy enough for my 5 year old...
  19. Diesel bronco is totaled :((

    Chit Chat
    Ouch! Hope noone was hurt. What are the plans for it rebuild with new body or part out?
  20. Hy35w npr

    Isuzu 4BD1T/2T
    I assume you're going to run an external gate for the lp turbo? Thats a tight housing, should spool nicely even on the IDI. Are you going to be checking drive pressure? I'd be real interested in hearing what it looks like with such tight exhaust housings on both turbos.
1-20 of 459 Results
Top