Cummins 4BT & Diesel Conversions Forums banner

Search results

1-20 of 235 Results
Advanced Search
  1. ZF 5-speed and forward engine mounts

    Transmission, Adapter, Transfercase Discussion
    Thank you!
  2. ZF 5-speed and forward engine mounts

    Transmission, Adapter, Transfercase Discussion
    Thinking of swapping Borge Warner 4-speed for ZF 5-speed. I love the 4-speed but engine would like another gear. I used forward mounts from chip van. Will the aluminum case of the ZF be an issue with more stress on transmission mount?
  3. 4bt with 6bt power steering pump and wabco vacuum pump-BLOWBY!

    General Discussion
    It sounds like vacuum pump is pressurizing crank case. Take dip stick out while idling and see if it’s pressurized
  4. Beading tubing

    General Discussion
    Thanks guys!
  5. Beading tubing

    General Discussion
    I need to make some custom intercooler tubing. I decided to make a die for my flypress and see if it would make acceptable beads.
  6. Soundproofing

    General Discussion
    Thanks Guys! This information should be helpful
  7. Watson transmission speedometer cable

    Transmission, Adapter, Transfercase Discussion
    Thanks Ed Where did you find speedometer cable?
  8. Soundproofing

    General Discussion
    Hi Guys What in your opinion is the best sound deadening material? Thank y’all
  9. Watson transmission speedometer cable

    Transmission, Adapter, Transfercase Discussion
    Who else is running a auxiliary transmission? Are you running the speedometer off of the auxiliary? Thank you!
  10. Power steering pump

    General Discussion
    My power steering pump (Bread truck) aerates the fluid in cold weather. I have checked all return lines and they are tight. Had same issue when first got truck running. Resealed pump and issue went away until it got cold weather. I am thinking can on pump is not sealing correctly. I have a ZF...
  11. Injectors seeping

    General Discussion
    Thanks guys! Ordered a set from Oregon Fuel Injection
  12. Injectors seeping

    General Discussion
    I have a couple of injectors seeping fuel. Should I have them pop tested while they are out? I have no idea of the mileage. If I wanted to replace them what would be a good choice? Stock engine. P-Pump. Intercooled. HX30W turbo. Thank you!
  13. Lift pump pressure

    General Discussion
    Thanks for all y'alls help. New gauge, replaced overflow valve and replaced fuel filter. 20 psi at idle. 30 psi at 2000 rpm no load. 25 psi cruising at 2000 rpms.
  14. Lift pump pressure

    General Discussion
    Cleaned lift pump screen. Some trash but not blocked. Changed filter. No change. Tried different gauge. 24psi at idle about 32psi at 2000 rpms. Hard to be exact as it is a 300psi gauge. Going to get another gauge. I am using 50/50 glycerin and water in line between isolator and gauge. Thanks for...
  15. Lift pump pressure

    General Discussion
    I really appreciate replies! I will check fuel screen and filter
  16. Lift pump pressure

    General Discussion
    What is the pressure range for lift pump Pressure for a P-pumped 4BT? I just added fuel pressure gauge griming into ip and have 13psi at idle and 17psi cruising at 2250 rpms Thank you!
  17. Fuel pressure gauge

    General Discussion
    I am going to add a fuel pressure gauge. I have a isolator so I won’t have fuel in the cab. What should I fill hose to gauge with? Antifreeze, glycerin, mineral oil ? Thank y’all
  18. Trailer light relays

    General Discussion
    Thanks guys
  19. Trailer light relays

    General Discussion
    Has anyone added fused relays to their rigs trailer wiring? Did you build your own setup or did you buy one? Thank you
  20. Grid heater wiring

    General Discussion
    Most grid heater schematics include a controller. I want to use a manual switch. Fused #6 wire from battery to Larry B’s relays. #6 wire from relays to heater and from heater to ground. Power from fuse box hot with ignition on. Through switch and light to relay then to ground. Will this work...
1-20 of 235 Results
Top