Cummins 4BT & Diesel Conversions Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. Cummins 6BT / 5.9 Conversions
    I have a 98 Chevy with a 89 12 valve going into it, instead of buying a tos and bracket can I use one of those tps delete kits for a 12 valve and wire it into the trans controller? Or does the 4l80e need to have a real tps?
  2. Cummins 6BT / 5.9 Conversions
    I have a 89 12 valve going in a 98 Chevy i have figured out that I can use the dodge power steering pump and use a T fitting for the two return hoses that come on the Chevy but what do I do with the vacuum pump on the Cummins as it won’t be used with the Chevy hydro boost system. Can I just...
  3. Cummins 6BT / 5.9 Conversions
    Swapping a 1st gen 6BT into a 1998 Chevy gas K2500. What is the ideal location to pull 12v run/start power for the fuel solenoid on the VE injection pump? I believe that’s the only wiring needed for the injection pump, correct?
  4. Buildup Showcase Threads - All Engines, Vehicles
    Hello everyone. I'm not really a member of this forum but I have occasionally browsed here looking for information and you guys are awesome. I stopped by to visit your classifieds and thought I may as well leave a link to my build while here in case anyone was interested (reading the stickies...
  5. Buildup Showcase Threads - All Engines, Vehicles
    Hello everyone, First off, a big thanks to all the quality contributors to this forum. None of us could successfully finish these conversions without the help and advice from the members posting positive and helpful information. That said, I wanted to showcase my first “Fummins” build...
  6. Cummins 6BT / 5.9 Conversions
    have a 1986 chevy Silverado and a wrecked 1994 dodge with 12 valve 5 speed. have a few question's? 1. what to do about the front end has a d60 I think, pumpkins on the passenger side, dodge is on the driver side :/ also its currently a 4 speed. 2. do I need or should I do any type of body...
  7. General Discussion
    Okay so I bought a 3.9 cummins. Well I want to put it in my Supercab Ranger. But I want the 4bt to be sitting on straight axles. So recently I found an 1995 Dodge 2500 single cab short box that has a wheelbase of 118.7 inches and I believe but not sure but the dana 70 is 65.5 inches wide. The...
  8. Buildup Showcase Threads - All Engines, Vehicles
    Hey guys, I promised that I would do a thread about my F100 build so here's my start for it. I'm not going to have a lot of pictures for it today but after Christmas break I should have a bunch of pictures and you guys will understand why in a little bit. Here's a little background on the...
  9. Cummins Tech Section
    Tired of my 350 and looking to do a cummins conversion in my 99 K2500 LS 4x4. It's the old square body style with stock t case and IFS. I plan on doing a SAS but I'm not sure which axel to go with. Not looking to go crawling really plan on this truck to mainly be a daily driver and a toy on the...
  10. Cummins 6BT / 5.9 Conversions
    first off let me state a few things: 1: i am not new to mechanics and have been around cummins engines all my life 2: i have the ability and knowledge to fabricate anything needed ________________________________________________________________________ Now on to my inquires! I own a 2000 GMC...
  11. General Discussion
    Hey guys, I have a holset Hx25 (non waste gate) that is configured for top mount and i have a rear bottom mount manifold. I already tried to flip the manifold (making it a front top mount manifold) but there is not enough clearance on my engine bay and im about to raise the engine another 2...
  12. General Classifieds
    For sale 1969 F350 Crew Cab. I started this project in the fall of 2011. I have been collecting parts for the build up to this point. I am at a point of re-prioritizing due to personal conviction NOT financial concerns. I'm listing this truck and the components i have collected. I am not...
1-12 of 12 Results
Top