Cummins 4BT & Diesel Conversions Forums banner

cummins

  1. Other Engine Swaps
    I have tossing around the idea of throwing a 12v in my 1998 1500. I have acsses to a motor and transmission. What would I have to worry about? Would i have to beef up the frame and suspension, i will not be towing anything. Will it bolt up? There is a 5.2L 318 in it right now. Thank you!
  2. Vehicles For Sale
    I have finally decided to put up for sale my 10 year project. I finally feel it is done (or at least close as my ocd is in check). No expense has been spared on this build and I have well over 20k into it. This thread will grow as I add things and pictures as time allows. Some basics: About...
  3. Buildup Showcase Threads - All Engines, Vehicles
    First post lol... not much for forums but thought you all may enjoy. Finally moves after 2.5years lol.... building with my 8yr old son and been a lot of fun. insta. @DieselFJ
  4. General Classifieds
    I am swapping out the 5 speed in my 87 Chevy for an auto so I have the entire setup for a squarebody chevy if interested. 1996 Dodge NV4500 HD I was told it was rebuilt not long ago and drove fine for the ~100 miles I put on it before pulling. Advance adapters kit (#50-9551) GM figure 8 NP205...
  5. Vehicles For Sale
    It is time to sell my project truck as I no longer have the desire to work on it. It is a complete running truck with a dead transmission so I consider it a collection of parts in a rolling package. 1997 4BT CPL 1967 Family VCE239R6DTRA A-Pump that was turned up by original builder. Original...
  6. General Discussion
    hello again, I am trying to find info on hooking up the crank sensor to the tach.. I have looked and sorry if it is right under my nose but any help would be amazing... crank and tone ring kit to a stock gas chevy gauge cluster. I am running this Alternator and do not want to hack into it if...
  7. Other Engine Swaps
    I have been contemplating buying an 04 or 05 dodge ram 4x4. The hinge in my choice is what frame I will need for my build. I have spent the last few months researching different small displacement diesel engines for one sole purpose... MPG. I will be driving 2000 miles a month for work. There...
  8. Cummins into Fords
    Im thankin bout doin a 4bt swap to my 2000 Ford Ranger XLT is there any tips as far as what trans i should go with or what rearend i should put under the truck or just any overall information that would help me find the thangs i need to know to be able to do the conversion and thanks in advance...
  9. Cummins 6BT / 5.9 Conversions
    Hi there, I'm new to this forum. I bought a 2000 GMC K2500HD Crew Cab with a Gas 350 that had a terrible rodknock, and a 4l80E behind it with the intentions of Cummins swapping it. I have a 1993 Intercooled VE pumped 12 Valve with an Eaton Fuller 5 speed behind it, the Cummins drivetrain is in...
  10. Cummins 6BT / 5.9 Conversions
    I have a 1997 12V Cummins that I plan on swapping into my 1984 Chevy K10 original diesel short box. Has anyone done this conversion before? Any advice would be helpful. Thank you.
  11. General Classifieds
    Cleaning out the garage. Cummins 4BT intake and elbow. $65 shipped CONUS. Paypal please!
  12. General Classifieds
    I have for sale my Cummins 4bt engine out of my Stacked Ranger pickup truck, reason I am selling is I have chosen to go a different route with the truck with a more modern 4.5 liter Cummins. The engine comes with s300 BD turbocharger, P7100 injection pump, built and gone through by Northeast...
  13. General Classifieds
    Cummins Parts for sale: Crank Dampner Part #3918999 (from 6bt in Ford truck) - $75 4bt Oil Pan; has dent in front and place on sump where bolt was rubbing (but not through); scratched and dirty but didn't leak - $40 4bt Motor Mounts - GM Bread truck style; upper and lower steel parts only...
  14. General Classifieds
    Cummins 4BT with Chevy trans adapter and clutch. Engine is complete, oil pan to turbo. Has a factory Chevy alternator, power steering pump, and tach drive. Engine has rebuilt head, 60lb valve springs, Colt Stage 3 cam and lifters, 5x0.014 injectors, ARP head studs, 3200 rpm gov spring. Also...
  15. Toyota Diesels
    Hi I am new here im not sure if this is the right place for this, so i apologize in advance if i was wrong. Im looking in to take a 4bt and the 6spd NV5600 and trying to stuff it in a 4runner with full width dana 60s. i have a done a little bit of research on parts i would need to make it...
  16. Vehicles For Sale
    Back up for sale $8,500 obo 1958 Dodge W100 Power Wagon Power Giant, for sale, 118" wheelbase, originally straight 6 now has a 318, Truck will run but does not currently run, some cancer in floor pan but not much, cancer in drivers side fender, Surface rust underneath, 95% complete and dent...
  17. General Classifieds
    I have I believe to be a used Holset baby H1C off a 1998 4BT CPL 594. There is no waste gate, looks like it was removed. I don't know what the history is. It looks like it was rebuilt at some point. There is some end play, but hardly any radial play. Let me know if you have any questions. Asking...
  18. General Classifieds
    Low Hours Cummins B3.3T Engine has approximately 750 original hours, and was removed from a Vermeer Bc1000 brush chipper. The chipper infeed was damaged in a traffic accident totaling the machine, the engine was intact and sold to me. Engine was gone through and tested by a diesel mechanic...
  19. Cummins 6BT / 5.9 Conversions
    I will be posting pics of my build over the next few weeks. Let me know what you think!
  20. Transmission, Adapter, Transfercase Discussion
    So I have a 1999 F250 CC V10 it has a S5-47M Gas Units for a transmission and I have an adapter plate which is the same pattern as the T19. So I have the adapter plate figured out, but that is about it. I am looking to see if anyone knows of a flywheel to stick behind the cummins that will fit...
Top