Cummins 4BT & Diesel Conversions Forums banner

fan hub

  1. Obsolete 91.5 to 93 turbo IC Ram Cummins Parts?

    Cummins 6BT / 5.9 Conversions
    Trying to source 91.5 to 93 Ram Cummins Intercooled fan hub # 3921688 & pulley # 3917674 but not getting results on goggle search anyone know if there are any cross reference numbers to these parts and where I would likely be able to obtain them?
  2. Bearings in Deutz F3L912 Cooling Blower

    Deutz & Other Aircooled Diesels
    I am about to reinstall my F3L912 after a COMPLETE rebuild, and I felt the cooling blower bearings were suspect, so I opened it up with intent to renew. The blower shaft runs on two 6204 deep groove ball bearings, sealed on the outside, open on the inside. My service manual contemplates filling...
  3. 6BT fan reposition questions.

    Cummins 6BT / 5.9 Conversions
    Hello, I have fitted a 6BT into my 1940s Diamond T 969 and have problems with fan-to-shroud alignment. The fan is 3/8" too low and 1 1/4" too far to the right. I have a mount/hub that bolts to the front of the head and one that bolts to the block, beside the timing cover. It is not an option...
Top