Cummins 4BT & Diesel Conversions Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Buildup Showcase Threads - All Engines, Vehicles
    Hello everyone, First off, a big thanks to all the quality contributors to this forum. None of us could successfully finish these conversions without the help and advice from the members posting positive and helpful information. That said, I wanted to showcase my first “Fummins” build. Let’s...
  2. General Discussion
    Okay so Im about to tear the truck down but I found out my 4bt has an A pump. I know I can get a good running p7100 pump from a 1997 Dodge Cummins. What parts would I need to take from the pump and any other parts would i need? Throttle linkage, etc. Sorry I read a ton of threads but so...
  3. General Discussion
    Ok so I have a 1996 ford ranger 4x4 3.0 I plan on putting a 4bt in it. I'm going to use a nv4500 and 205 and do a sas to a dana 44 up front and a ford 8.8 in the rear. I've done research but haven't had any luck on a few things like what radiator I should use, or what to do for fuel tank and...
  4. Cummins into Fords
    ok heres what im working with. 1975 250 chassis with a 390, c6, np203 t-case. 79 f100 cab and front clip with a flat deck (i will post pictures soon!!) I plan on swaping a second gen 12v engine and nv4500. if i can get a good deal i will buy a complete dodge truck so i can swap axels, t-case...
  5. Cummins into Fords
    I've got a 93 F150 with a 5.0l 302 4x4. I was looking to see what all I would have to do to switch over to a Diesel engine in it. I need detailed info every thing from exact engine to any tubes I would have to switch please let me know cost to if you could. Thank you,
  6. Cummins into Fords
    Hi guys.I'm new to ALL of this except the ranger. I'm really wanting to put a 4BT in a 98' ranger and I would love it if I could get a list of things to buy/put on my ranger. I haven't found anyone who knows how or even what I'm talking about in Oklahoma and it's driving me crazy. Thank you so...
  7. Cummins into Fords
    ive decided to replace the 300 i6 in my 1991 f150 with a 4bt the factory power ratings seem about the same as if not better than the stock gasser and the suspension shouldnt cause any trouble as the cummins weighs about the same as a 460 v8 the plan is to mate the 4bt to a five speed stick from...
  8. Want to Buy
    I bought a frame section from a chevy p30 van and got everything from the intercooler to The transmission with driveshaft yoke. Im kind of new to this and I need all the ford adapter stuff to make it work in my 78' f150. I have the liquid filled isolators and mounts, sae3(from what I was told)...
  9. Cummins into Fords
    Hi to all, I'm a newb here. I am in the early planning stages of doing a 4bt swap into a 75 ford f100. I am not worried about motor mounts of trans mounts. My biggest concern is, I would like to keep the manual clutch linkage. Fabrication of the linkage is not a real big concern. I was wondering...
1-9 of 9 Results
Top