Search Results for ‘ford’

Well it's finally happening. I've wanted a 5 speed swap almost as long as I've had the truck, I never was a big fan of the ttb, and when I discovered the 4bt I decided I had to have one. Finding all of this locally for a decent price was difficult, but I think I made out alright. Subject of the...

Looking for someone to school me on the mechanical Bosch MW inline pump. I have a 1991 Ford F800 with the 7.8 Ford/New Holland and as it sat when I bought it, it was adjusted very conservatively. I have ready through nevrenufhp's (Low Buck Diesel Power) writeup on these pumps and there was a ton...

Okay ladies and gents as the title states I'm interested in doing a 4BD1 swap into my 1978 Ford f150 351M 2wd long wheel base pick up with the C-6 auto transmission. It has factory air conditioning/ heat along w power steering (tilt steering wheel) and power brakes. I don't know which rear end I...

I’m looking around to get information on swapping my 2009 f150 King Ranch. I’m in Texas so a place here would be preferred but it doesn’t have to be. If I can save some money on the swap I’ll take it anywhere. Also was wondering on what do these conversations normally cost. Just trying to see...

Hello, I have a 1983 om616 with oem manual transmission attached. Can I slide it into a 1987 ford ranger? 1987 ford ranger 6cyl manual 5 speed 1983 Mercedes 240d with manual 4 speed I would like to use Mercedes motor and transmission. No adaptors plates.

I recently purchased a 4bt and I am planning on swapping it into my 1979 f250. It currently has a 351m backed by a t18. Truck is linked and is primarily used off-road so I’d like to keep the t18 If I can. What is my best option as far as sourcing out an adaptor plate/clutch + flywheel? I have a...

It is time to sell my project truck as I no longer have the desire to work on it. It is a complete running truck with a dead transmission so I consider it a collection of parts in a rolling package. 1997 4BT CPL 1967 Family VCE239R6DTRA A-Pump that was turned up by original builder. Original...

So been cruising my 97 ranger for a few years now with the 4bt. But have bent a leaf spring in the front end so I suppose it's as good of time as any to go to coils. Running dana30hp. No not changing axle I love it and it's plenty for me. What is everyone running for coils on the ranger sas...

I am swapping a 4bt into a ford f150. I am looking for the 4bt front mounts with the 45 deg angle to mount to the 300-6 frame perches. Thanks.

Cummins 4BT with Chevy trans adapter and clutch. Engine is complete, oil pan to turbo. Has a factory Chevy alternator, power steering pump, and tach drive. Engine has rebuilt head, 60lb valve springs, Colt Stage 3 cam and lifters, 5x0.014 injectors, ARP head studs, 3200 rpm gov spring. Also...

So the final piece to finishing my 4bt swap into my ford ranger is the transmission. I bought my 4b already mated to an allison AT542N tranny. I got no wiring or anything with the tranny and i am completely 100% lost and starting to get frustrated. So obviously its an automatic transmission so...

Greetings, I hope some of you have been through this process before and can shed some light for me. I'll figure it out on my own, but it will take 5 times longer than if I get feedback from someone who has already done it. I've got a 93 Grumman-Olsen Step van with the 4BT and a Ford...

More pictures here http://s185.photobucket.com/user/CrustyNut/library/1930 for sale All steel Henry Ford body with Gaslight steel fenders. 4 inch chop, '32 gas tank out back. Running gear is a 4bt Cummins diesel with a hx-35 turbo, M5R2 5 speed transmission, and 9 inch rear axle. Interior has...

i am selling my ford f350. it runs and drives needs to be completed body wise. i also have an auxiliary trans for it and a ruff flat bed for it. pics are on my thread of the truck. 3-53 n with a np540 5 speed. dana 70 rear 3.73 gears. spicer 7231d aux goes with it, brackets and shifter and...

Alright hey there, I have a 97 ranger that im swapping a 4bt in, but i want to keep her as factory as possible. (shes an automatic) So, I guess i was wondering if a gasser E4OD trans would be a good candidate. I would ranter not use a c6 cause i like over drive, haha. And AOD is the biggest...

I have a 1994 Ford ranger 2wd. Im about to pull the motor and transmission and will slowly acquire the 4bt and then the transmission. I am wanting to maybe lower the truck the 3/4in but i know i will be replacing the rear end, have to put stronger springs for the front. I need to know what...

Deleted link to insure my own sucess! found this on Craigslist. I am told it came out of a 89 Ford F 350 dually diesel.to me it looks like a ZF 5 but it's listed as a six-speed. Google says only the c6 came in that truck

ok heres what im working with. 1975 250 chassis with a 390, c6, np203 t-case. 79 f100 cab and front clip with a flat deck (i will post pictures soon!!) I plan on swaping a second gen 12v engine and nv4500. if i can get a good deal i will buy a complete dodge truck so i can swap axels, t-case...

i have a ranger that needs some beefing up. i am seriously considering a 4bt swap but i need to know what i need to do along with it, like tranny, clutch, rear end, and most importantly, what i can do to keep 4x4. im curious as to how much it would cost as well. the idea of putting a 4bt into a...

Selling a few things. 4wd T-19 transmission with mated borg warner transfer case, has 56k miles on it. Has Ford bell housing. 2wd T-19 transmission with 0 hours/miles on it since rebuild by camerota transmission services AX-15 transmission out of a 1995 Jeep cherokee with 37k on it All are...