Cummins 4BT & Diesel Conversions Forums banner

hydroboost

  1. Wanted 4BT Steering Pump Assembly

    Want to Buy
    I have a 1989 4BT out of a bread truck and need to buy a working hydraulic steering pump with its gear attached. My pump is making screeching noise and I think the pressed fit gear is free spinning and not gripping. I can buy the pump local but I cannot get the gear to seat properly all the way...
  2. Best Hydroboost for a Jeep YJ ?

    General Discussion
    Hi All, I recently acquired a 94 Jeep YJ and immediately sourced a 4BT to swap with the old 6cyl gasser. I intend to use a Hydroboost system for braking and I am wondering which brand of Hydroboost/Master cylinder is the easiest to adapt to the JY ? Any Jeepsters out there who found a master...
  3. 6BT into 2000 GMC 2500 Classic body.

    Cummins 6BT / 5.9 Conversions
    I'am installing a 96 12 valve in my truck if there is any questions i might be able to help with just ask.I have built or replaced all of the running gear,drive shafts ,rebuilt transfer case,and trans 4l80e. Just sharing my build something else to look at.This started out as just build a nice...
  4. NEW REMAN Hydro Boost from p30 with bracket and master

    General Classifieds
    I have a hydro boost set up with master cylinder and firewall bracket from a p30. This is the type that sits straight out from the firewall like on pickups, not the 90 degree bent to the side type. I bought it off ebay and it doesn't look like I'll ever use it with my current configuration (got...
  5. problems with the powersteering

    Cummins Tech Section
    i just finished settin up my powersteering system....and when i started the truck to bleed the pump. i well i had fluid going everywhere and one hell of a wierd noise coming from the pump. i guess some specs would help. i am running the stock hydroboost pump from a 97'ish dodge with the...
Top