Cummins 4BT & Diesel Conversions Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 10 Results
  1. Transmission, Adapter, Transfercase Discussion
    Hello all, This is my first post here (other than a wanted ad for a 2wd nv4500 short tail housing), so hello! Doing a 4bt/NV4500HD into a divorced NP205 72 ford f250. Anyone know if the 2wd NV4500 chevy mainshaft and short tail housing wouldn't swap right into the Dodge NV4500HD 2wd...
  2. General Classifieds
    I am swapping out the 5 speed in my 87 Chevy for an auto so I have the entire setup for a squarebody chevy if interested. 1996 Dodge NV4500 HD I was told it was rebuilt not long ago and drove fine for the ~100 miles I put on it before pulling. Advance adapters kit (#50-9551) GM figure 8 NP205...
  3. General Classifieds
    Fits GM trucks with NP205 transfer case. Was on an automatic(TH400) but will also work on a manual(SM465). This is kit number 3D0205A from gear vendors. Unit needs rebuilt, so selling as a good core. The electronics are in fair condition. The foot switch, signal interrupter, and speedo...
  4. Axles & Differentials
    Alright everyone I am ready to rebuild my front and rear diffs, I am currently runnig 4.11. I did some searching around here to see what everyone is running for gears and there seems to be a pretty good mix out there. I have done the math and think that for my application (a daily driver that...
  5. Buildup Showcase Threads - All Engines, Vehicles
    Ok, here it's my litle project... 2006 Duramax Engine with about 60.000 miles Nv4500 Gm tranny with Dodge HD Input shaft Np205 t-case Front Dana 60 Rear stock silverado axle (11.5 AMM) The chassis is from a chevy express (or something like that)
  6. Transmission, Adapter, Transfercase Discussion
    Found the 205's weak point. the output shaft is sloted in three places. Apparently for lubrication. this is the third or fourth one this truck has shattered. What does everyone think about tig welding the lube slots back shut re-machining it and drilling a smaller hole in their place? would it...
  7. Cummins 6BT / 5.9 Conversions
    Hello everyone, long time since ive been on the site and things but i have just started the process of rebuilding my 1985 M1008....I originally bought the truck as a Cummins swap to begin with, i purchased it from a complete fool and member of this site who will remain unanimous and i think...
  8. Transmission, Adapter, Transfercase Discussion
    How do I use the older style NP200 series transfer case mounted parking brake on a newer (89-93 Dodge) NP205. If this is possible I need to know what parts are involved and possible parts set sources. I would like to eliminate the cable system to the rear axle.
  9. Cummins 6BT / 5.9 Conversions
    The 1995 12v 160hp engine made it here from California this am! Picked it up from a guy who swapped it out for a 24v and 5sp...because he needed "more power" Um..OK...that is what a fuel plate is for...oh well. 180K and the only "leaks" I can see are around the valve covers and some down by...
1-9 of 10 Results