Cummins 4BT & Diesel Conversions Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Transmission, Adapter, Transfercase Discussion
    Yes another oil thread but I am all about finding parts and fluids that are readily available and thus inexpensive. Though when it comes to transmission oil for the nv4500 you must use this magical oil that is no longer produced or use an alternative oil that has to be shipped or go to a...
  2. General Discussion
    Ok so I've almost finished my 4bt swap into a 96 f150 eddie bauer and I've had it started and running but I had no oil pressure. I took off my turbo line and still nothing. My oil filter was also empty so I borrowed a preluber from a friend and ran a half gallon through it into my sending unit...
  3. General Discussion
    I am about to embark on a major overhaul/hx30/35 compounds on my truck, and due to clearance issues I need a remote oil filter setup. I recently purchased a dual remote oil filter head and thread-on block adapter which I plan to use two stock filters on. The ports on the filter head assembly are...
  4. Mitsubishi Diesels
    My turbo is not gonna clear the big oil filter on the 4D55 in my ranger. I was wondering if there was a way to do a filter relocation, or if I could plug the filter plate, and just put a filter housing on the firewall with a filter in series with the oil cooler lines... Anyone done this? Any...
  5. Cummins Tech Section
    PLEASE BOOKMARK THIS THREAD FOR FUTURE REFERENCES Dodge NV4500 hydraulic clutch line adapter fittings: http://www.4btswaps.com/forum/showthread.php?t=630 <=Hose Adapters http://www.4btswaps.com/forum/showthread.php?t=1231 <=Into Ford
1-5 of 5 Results
Top