Cummins 4BT & Diesel Conversions Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Performance Discussion
    After doing plenty of searching on the forums, I have seen tons of threads from 2008 - 2011 with people talking about different rebuild kits OR people saying not to rebuild them because they are cheap to buy (what a time that must had been). Well its 2017 and 4BTs are approaching $5,000 for a...
  2. Performance Discussion
    Hello all, I had a bad o-ring on my VE pump that I replaced over the weekend. While doing the reseal I noticed a lot of tarnish and sandy grime build up in the pump. I would like to send it to a shop for a professional cleaned, rebuild and flow tested. Can anyone recommend me a shop or...
  3. General Discussion
    hey guys, im thinking about buying a 4bt from a scrapyard and rebuilding it, so my question is, how much will a stock rebuild cost compared to an aftermarket rebuild, thanks:)
  4. General Discussion
    Hello, After a couple years of reading/researching/getting the funds/losing the funds/etc/etc, I'm finally looking at purchasing my 4bt to swap into my '89 Bronco. I'm in Central Kansas and will be needing advice, help, etc. Anyone nearby with a rig I could look at, advice they could give, etc...
  5. Transmission, Adapter, Transfercase Discussion
    I am looking for advice on which parts to choose for a project of ours. We have a Condec K-Loader, model 2331-1983. It is equipped with a Cummins V 378 C engine, and Allison transmission AT 545 83 C 26 (Modified). The vehicle has a maximum speed of 25 km/h. As we are not going to use it on...
  6. Want to Buy
    looking for 2 rods with pistons and a vgc crank verry good needed. because the rest of the engine is rebuilt the motor lost oil pressure and spun 2 rods...
1-6 of 6 Results
Top