Cummins 4BT & Diesel Conversions Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 14 Results
  1. Cummins 6BT / 5.9 Conversions
    I am looking to swap my 98 Chevy and have a rh47, I wnat to keep my push button t case which is a np243 will the rh47 bolt right up to it, and what will I have to do to make the speedo work?
  2. Transmission, Adapter, Transfercase Discussion
    So I have a 95 ford ranger with a 88 bronco2 c5 with c4 valve body its got dual T-cases would that work for a 4bt conversion? Would that tranny handle the torque. I also would like to know if it works what would an estimated top speed be in my last gear because if it is below 60mph it is not...
  3. Transmission, Adapter, Transfercase Discussion
    So in planning for my 4BT swap into my '76 Scout II, I have decided that the ZFS5-42 gas tranny is what I will go with (because it is a direct bolt-up...right?). I wanted to go with the diesel version because of the more usable 4.14 1st gear. However through my research I believe it wont mate up...
  4. General Discussion
    Hi everyone, I am interested in putting a 4BT in my 1996 S10 Blazer. I have done a little research on this and found a couple things I need to and may need to do to make this possible. Need to do: 4BT motor (obviously) New transmission (NV4500 or NP435) Beef up suspension Maybe need to do...
  5. Transmission, Adapter, Transfercase Discussion
    So I am interested in replacing the motor in my 1996 Blazer with a 4BT Cummins because I've had so many problems with the motor in it. My Blazer has the New Venture Gear 3500 manual transmission and the New Process 233 transfer case. I was just wondering if anybody knew if that transmission and...
  6. General Classifieds
    Selling two 1986-87? T-19 Transmissions that I picked up for a crawler project but decided to go a different route. Both are from behind bread vans that had 4bt's. One is 4x4 and includes the Borg warner transfer case and bellhousing and one is a 2wd fresh rebuild from camerota with zero hours...
  7. Transmission, Adapter, Transfercase Discussion
    im wanting to convert my 1973 ih scout ii to a 4bt just trying to figure out what my best option for a transmission an transfer case are.
  8. Transmission, Adapter, Transfercase Discussion
    Hi All, After having installed a Fuller FSO6406A as a replacment transmission for my failed NV5600 in Jan 2008 I wanted to give an update. Still no issues with the Fuller after 30,000 ++++ miles. My Dodge 3500 was a 4 X 4, however there were no adapters available to couple the transmission...
  9. Transmission, Adapter, Transfercase Discussion
    Hello all, I've got a few questions that I hope someone can help me out with. A few months back, I acquired a 4bt engine (the whole van actually). I'm swapping this into my 85 F-150. The engine came with a th400 2wd trans. What I'm wanting to use is a 4L80e (to retain the overdrive like I...
  10. Transmission, Adapter, Transfercase Discussion
    Hey Guy, Need some advice. I have my linkage all set up but shifting the NP241 is so hard you cant do it with the lever. Is there a way to lighten the engagement of the detents on the 4wd selector arm? Thanks in advance....
  11. Transmission, Adapter, Transfercase Discussion
    Hey guys, getting close to fininshing my wagon and Im trying to get the 4wd linkage and stuff figured out. The wagon has a 4wd light on the panel that I would like to integrate into my 241 transfer case. Is there a sensor i can install somewhere like my old 228 had? Thanks, Andy
1-11 of 14 Results
Top