I posted my HX-35 on craigslist.
I am asking $250 + Shipping on the advertisement.
To the 4BTSwap Forum $225.00 plus shipping.
*** No pun intended "Swindler" is my last name, not what I do.***
I've read that the fuel line in the w126 is insufficient and can cause insufficient flow and fuel vaporization.
I believe I've deduced a solution, pressurize the line.
I bought a mr gasket 105 gph pump capable of 14 psi with a regulator 4-14 psi. I also ordered the neccesary fittings, hoses...
Im looking at giving the 4bt in my 91 C1500 a rebuild as its burning oil pretty bad right now. I think the engine is at around 500,000 miles. While im at it I want to do some performance mods. On the list right now is a denny t stage 1 fuel pin and maybe some power driven diesel injectors. Im...
I want to swap a 4bt into my Jeep TJ and Im looking to find a turbo set up that will spool fast so I have boost right off idle but also allow me to cruise at 60-65. I was thinking of doing a parallel set up so the boost is load is split but I am not sure if it is possible or what turbos I would...
I have I believe to be a used Holset baby H1C off a 1998 4BT CPL 594. There is no waste gate, looks like it was removed. I don't know what the history is. It looks like it was rebuilt at some point. There is some end play, but hardly any radial play. Let me know if you have any questions. Asking...
I was looking at buying a Holset He221w and want to be sure it a genuine holset before I go through with the purchase. I have read though the document on identifying frauds by Holset found here http://www.myholsetturbo.com/images/holsetcounterfeitprevention.pdf. What do you guys...
I am looking for a turbo for my project. As the tittle says I am looking for either a Holset HE221W in 6cm or a Volvo TD04HL-16t / TD04HL-18T straight exhaust in 6cm. If you have one for sale or happen to come across one for sale please send me a PM.
I have a new Holset HE221w turbo. Never installed. I bought for a project I lost in a shop fire. Has minor defect on the cold air outlet that should not effect anything. I also have a hose adapter for the same outlet. Price $400 for all, plus shipping.
Hey guys, I have a holset Hx25 (non waste gate) that is configured for top mount and i have a rear bottom mount manifold. I already tried to flip the manifold (making it a front top mount manifold) but there is not enough clearance on my engine bay and im about to raise the engine another 2...
Hi, so I'm a novice with this performance type of work so excuse any mistakes I might be making and let me know.
I have a 4bt in a jeep yj that I went through this winter. It was in pretty rough shape (out of a bread truck), had everything sent out to get machined and am starting the rebuild...
I know some people don't get out much on this forum and explore the sub forums,
There are allot of Cummins 4bt fans here, I like them too. Don't forget about the Isuzu 4bd1t its a also a 3.9 direct injection 4cyl turbo. like cousins
Im swapping mine into a 1996 Range Rover HSE.
H1C it worked great and does have a good bit of play but not hitting and very usable or rebuild-able. It has a 3 in intake. 125
Fluid dampened motor mounts 100
90 deg angled intake neck 60
stock intake tube with the rubber ends 50
stock intake cover plate 30
stock bottom rear dump...