[LincTex]

#366 governor spring sources


Did a search, I didn't really come up with much

1) What is the full part number needed, so I can ask for it?

2) Buy from where? Injection shop? Cummins?

 

[Machman]

Bosch #1-464-650-366

Can be had from about any shop that does work on the VE pump, about $20 from what most have reported.

 

[LincTex]

That is very helpful, thanks!

 

[brut67]

Diamond Diesel and Turbo

Just ask for a VE pump 3200 rpm spring $16.

2550 East 12th Street
Oakland, CA 94601
(510) 532-8500
(510) 532-1026 fax

 

[redhedbronco]

Piers Diesel Resource 13 bucks apiece.

 

[LincTex]

http://www.piersdiesel.com/index.htm 13 bucks apiece.

Wonder if they charge a stupid $9.99 handling on every order like summit racing does?

 

[mooktank]

I second piers. Call them up!

 

[LincTex]

I second piers. Call them up!

I sent Mark Wilson an email requesting a to-my-door cost.

 

[toolmanoffroad]

Wonder if they charge a stupid $9.99 handling on every order like summit racing does?

I think I could buy another motor if I still had all those 10 doller handling fees. Naaaa... I would just order more go fast goodies.

 

[JimmieD]

I think I could buy another motor if I still had all those 10 doller handling fees. Naaaa... I would just order more go fast goodies.

HAH! I bought 2 Cummins emblems for $7 and didn't check shipping, which turned out to be $17!!!! To make it worse, when I moved I stuffed them somewhere and never found them again, so bought some more from Cummins for $4-$5 each or so...

 

[Hot Dawg]

spring

Go with piers, very hastle free.

 

[CrewCab59]

I have them in the Vendor section as well !

 

[Diesel Durango]

Wonder if they charge a stupid $9.99 handling on every order like summit racing does?

i think it was like 5 dollars "freight" still seemed crazy for a part they could put in an envelope and put a 41 cent stamp on... maybe 82 cents if it were a padded envelop.

Still very easy to deal with company for sure. I just need to put mine in...

 

[LincTex]

I have them in the Vendor section as well !

Haven't checked that out yet....when did you start carrying them?

I got mine from Piers for $16 + $5 and it took about a week or so to get here.

 

[CrewCab59]

I have been a Vendor for a few weeks ,check out my other parts .

 

[LincTex]

I have been a Vendor for a few weeks ,check out my other parts .

I bought my spring almost two months ago.

If you have a website with parts, you should add the address to you sig

 

[CrewCab59]

I bought my spring almost two months ago.

If you have a website with parts, you should add the address to you sig

I won't have a web site until after the 1st of the year.

Scott

 

[nhdiesel]

I just went to Piers site, and shipping for the spring is as follows:
Please select shipping method :
UPS - Ground $11.79USD

I'm not about to pay $12 shipping for a freaking spring, especially after only paying $10 for an adapter housing to come from Kentucky, and $15 for a bellhousing from Texas! (to New Hampshire).

Scott, if you can do better on shipping, PLEASE send me a PM! Thanks.

Jim

 

[CrewCab59]

Jim ,
How does .41 cents sound???

They have a flat rate ship ,paper work and sales cost .

 

[vr1967]

Got mine in only a few days from Crewcab59, for about $18 shipped.

Virgil