Cummins 4BT & Diesel Conversions Forums banner
1 - 1 of 1 Posts

· Registered
16 Posts
the GM adapter will mate to a 700r4. If you get the whole GM setup, flywheel housing, flex plate, the "wavy band" and the piece in the center. I had an adapter made up to mate the 700r4's torque converter to the wavy band, like this:
Thanks for the measurements on the adapter plate, it turned out awesome, BudBuilt in NC was able to cut it for me after the Copperhead Fab guys strung me along for 2 or 3 weeks and couldn't deliver:grinpimp:

I owe you some beers:beer::beer:
Bumper Automotive exterior Auto part Vehicle Automotive exhaust

Auto part Rotor Locking hubs Flange Wheel
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.