Cummins 4BT & Diesel Conversions Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1,753 Posts
Discussion Starter #1
On my ‘97 5.9 I am putting in my ‘55, the bottom of the round factory cooler on the right side of the engine, there are two female fittings that are empty. Hard to see, I didn’t take the engine out. Nearby Dodge dealer has no clue, no longer available. I presume they thread in with pipe threads and have a nipple to go the cooler lines. Pretty hot under there.

Does anyone know what they are, know of any stock?

Thanks,

Ed in CO
 

·
Registered
Joined
·
151 Posts
Ed, I think you're referring to the stock auto trans oil cooler. The ports are 3/8 npt as I recall. The dodge trans lines are a quick connect style. Hope that helps. Joe.
 

·
Registered
Joined
·
1,753 Posts
Discussion Starter #3
Joe, thanks, are the lines off the coupling Al or neoprene. Pipe thread in the housing to 3/8 NPT?

Ed in CO
 

·
Registered
Joined
·
151 Posts
Ed,

The lines on the 95 Dodge my engine came from were steel, 1/2 dia. Yes, the cooler ports in the cooler are 3/8 NPT. The 'female' part of the quick connect threads into the cooler.

Joe.
 

·
Registered
Joined
·
1,753 Posts
Discussion Starter #5
Thanks guys, now I just need to find two of those quick connectors and the steel tubes.

Ed in CO.
 
1 - 5 of 5 Posts
Top