Cummins 4BT & Diesel Conversions Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #2
First things first I kept everything from the donor truck to keep my 24v happy. you would be surprised how simple this build really is. I have oil pressure, coolant temp and shortly speedo all working happily in the factory gauge cluster.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #5
More pics!!

20140416_181544.jpg So I decided that I wasnt going to spend almost $300 for engine side mounts when i have the fabrication skills to build them. I did some research and found that I could keep the stock towers if I used first gen motor mount isolater ( NAPA PN #6021653) 6021653.jpg This is what i came up with 20140418_140448.jpg The piece that bolts to the block is 1/2 inch and the others are 5/16 it just happened to be laying around the shop. 20140418_112443.jpg 20140418_134507.jpg 20140418_180913.jpg she sits down nicely!
 
1 - 5 of 5 Posts
Top