I am looking at a f150 with a 5.4 in it and a 4r70w tranny. i have 4bt with t400 from p30 step van. It is set up for the torque already and i would not need a controller. I want to set the engine with the same offset as the step van to simplify the transmission bracket if possible. I would have the ford tranny to beef up if the t400 does not live long. it has 69k on it now. Does anyone see a problem with the t400 in the ford. I know i will need to modify the drive shaft, but that is no biggy. Any help much appreciated.