Cummins 4BT & Diesel Conversions Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
454 Posts
Discussion Starter · #1 ·
been messing around with my starter. the adaptor i got made was machined wrong. the starter is now too close to the engine. one solution i came up with is to use a smaller drive pinion. will the slightly slower crank speed from a 12 tooth pinion ( as opposed to 13. ) affect the starting at all ? this was the only drawback i could come up with.
 
1 - 1 of 1 Posts
Top