Cummins 4BT & Diesel Conversions Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I bought a basket case Deutz 1011f . just got the block and head back from the machine shop and I'm trying to put it all back together. Problem i ran into is the guy that took it apart removed all 4 injectors and did not mark them. the shims all stayed stuck to the block. I removed and measured them. 3 are the same thickness but one is .008 thinner. any way to figure out how they are shimmed with out taking it to a dealer ?
 
1 - 1 of 1 Posts
Top