[dixiepc]

Looking for a gated 14cm exhaust housing for a HX35.

 

[Russ McLean]

Yet another "new member" responding to a parts wanted post.

 

[Hawk creek]

Hi friend?

James my old coworker has gated 14cm exhaust housing for a HX35 Available for sale in excellent condition

Pm him via his email address
[email protected]

Thank


Sent from my iPhone using Tapatalk

Y’all should be careful of this new dude


Sent from my iPhone using Tapatalk

 

[BobS]

Y’all should be careful of this new dude


Sent from my iPhone using Tapatalk

GENERAL RULE OF THUMB: IF THEY HAVE NOT BEEN AROUND FOR MORE THAN A MONTH AND HAVE LESS THAN 10 POSTS THEN CONSIDER IT A PROBABLE SCAM! ALSO CHECK THE EMAIL ADDRESS ON STOPFORUMSPAM.COM WE HAVE A WAVE OF THIS GARBAGE INBOUND TO THIS FORUM AND IT WILL LIKELY GET WORSE.

 

[dixiepc]

This has become a problem internet wide. I wish these people would just get a job and quit trying to steal from honest hard working folks.

 

[char1355]

Dixiepc, that isn't a very common housing. It did appear on some '94-98 Dodges but there seems to be no specific reason. The parts are readily available but not cheap. Around $600 for the complete setup. HX35 14cm Gated Housing - 1994-2002 Cummins Turbo You can buy a complete new Holset turbo out of China with that housing for about the same money.

 

[dixiepc]

Yeah, they are high. They came on some buses. Unfortunately the bus that I got had a 12cm.

 

[Nascarmark]

In stock

Holset 12cm Wastegated housing for H1C or HX35 89-02 Dodge

Holset 14cm Waste gated housing for H1C or HX35. Fast spooling & drive pressure relief with a internal waste gate

www.dieseltuff.com

 

[dixiepc]

Oh, I've found all the new ones. They're a bit high for my taste. Looking for a used one at a reasonable price.

 

[char1355]

Here may be one. T3 style HX40w HX35 turbo turbine exhaust housing 64mm wheel 14cm 5 bolt 2.5" | eBay Pretty sure this one is built by Turbo Lab not Holset. On second thought, it says unbranded and I see 16cm in another description. Might steer clear of this one.

 

[SUBRUTUS]

Here may be one. T3 style HX40w HX35 turbo turbine exhaust housing 64mm wheel 14cm 5 bolt 2.5" | eBay Pretty sure this one is built by Turbo Lab not Holset. On second thought, it says unbranded and I see 16cm in another description. Might steer clear of this one.

Turbo Lab is reputable...for turbo configurations outside the Cummins norm. Unbranded is generally Chinese items.
Notice Diesel Tuff has the real deal.

 

[dixiepc]

That one has been cut for a HX40 turbine wheel. Doesn't look like a bad deal but not what I'm looking for. Thanks anyway.