Flexplate coupler?
1 - 4 of 4 Posts
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Transfer Case
Transmission, Adapter, Transfercase DiscussionI need a clean NP200 transfer case in good working condition. I'm doing a 4BT swap in a Power Wagon. Thank you. [email protected]- 11
- 341
-
GPM flow through transmission coolers
Transmission, Adapter, Transfercase DiscussionI've searched and found only one source that claims for 47/48RE 1 gallon in 45 seconds or less is considered good any of you know if this is correct?- 0
- 38
-
SUBRUTUS · updated
-
The complete Allison 1000/2000/2400 info and swap guide thread
Transmission, Adapter, Transfercase DiscussionI decided to start a thread devoted to this trans for a couple reasons. First off, there is a LOT, and I mean a LOT of misinformation out there. Second, there is little useful info for some basic specifications on these transmissions. Finally, a lot of guys think they are too complicated or too...- 762
- 598K
-
Watson Transmission model 42
Transmission, Adapter, Transfercase DiscussionHi. I have a Watson Transmission model 42. I have just had it totally rebuilt with all new bearings by a professional mechanic. But the tail shaft still has play it it. If I grab the brake drum for the hand brake I can wobble it. I am not happy about this. But the chap who did it up said this is...- 17
- 358
-
Adapter strength
Transmission, Adapter, Transfercase DiscussionI have an sae2 adapter to the gm pattern. Both adapters are aluminum from Phoenix adapters. They cannot give any info on strength ratings. It doesn't LOOK very strong. I guess I'm a bit paranoid. This is going behind a 6.7 Cummins so a good amount of torque. Don't want this adapter to break and...- 4
- 391
Join now to ask and comment!