Cummins 4BT & Diesel Conversions Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
173 Posts
Discussion Starter · #1 ·
:grinpimp: I have been looking all over for Fuel pin, and govenor spring. I found the govenor spring but not for 16 can anyone send the link where the 3200 govenor spring is 16 dollars also a link to the correct aftermarket fuel pin i should get. thanks so much
 

·
Registered
Joined
·
854 Posts
I have been hearing "don't mess with the pin" because it is too easy to over-fuel. You don't need it unless you have already got bigger injectors. All of the other "free" mods will push the pump past what the injectors will flow.
 

·
Registered
Joined
·
3,391 Posts
I agree with Linc. There's lots to be gotten out of the stock part by simply rotating it instead of buying an aftermarket pin like the Old Smokey mount.

Any local injection shop can get you the Bosch spring. I had to pay about $18-$19 and wait a week for it to come in, but no shipping charges!
 
1 - 4 of 4 Posts
Top