Cummins 4BT & Diesel Conversions Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
950 Posts
I wouldn't bother with any billet shafts with the 4bt unless you really want to shift WOT with the tc locked... IMO, you're on the right track with a tighter single and a better valve body with more line pressure.

Temp sending unit in the hot line to the trans cooler never hurt anything either ;)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top