[crobey4393]

I have a 1977 Chevy C/10 with a 4BT installed. I need ideas regarding where and how to mount my Intercooler.
Cooler is 34" wide and 19" Tall at tubes.
Any help is appreciated.
Chuck

 

[turbos10]

I used a 2nd gen. dodge cooler on my 87 which is similiar in size. What I did was weld one tab on each side from the cooler tank to the core support and then add one tab at the top to bolt from the hood latch area to the cooler. This also made the cooler double as the center brace for the core support since I had to remove it.

 

[Hot Dawg]

Here is a shot of the IC on my 82 Chevy. I mounted it right to the core support at the top and then built a bracket to go on the bottom.