Cummins 4BT & Diesel Conversions Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2,212 Posts
Discussion Starter #1
I had some down time while waiting for funds to get my IP working after a "quick" reseal job so I took a bunch of leftover parts/material and made a new hitch for my trail camper to replace the pintele hitch it was too noisy off road. I used 2 outer front wheel bearings with 1 trip on them from the ond closed knuckle d44 front axle the thrust bearings from the np203 i bought to do the 203/205 and a roller bearing from the m5odr2 I rebuilt for my swap the iron was rems from the swap all I bought for the project was a graed 8 5/8x6" bolt and 1 foot of 3" UHMW rod for the bushing :idea: We used it for the first time last weekend and it worked well....for a bunch of junk and dont look too bad either at least by my standards ;)


What do y'all think ?
 
1 - 1 of 1 Posts
Top