Cummins 4BT & Diesel Conversions Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
I know there have been a ton of references to the external dimensions of the 4BT motor. But (there's always a but), I need a good measurement of the height of the motor measured from the shallow part of the oil pan to the top of the valve covers. All height numbers I find are for "overall height" which to me means measured from the lowest part of the pan.
 

·
Registered
Joined
·
41 Posts
Well, I just measured mine and it came to approx. 26". Thats from the belly of the pan (not the sump) to the valve covers. It'll be a bit taller because of the air intake however.

-andrew
 

·
Registered
Joined
·
169 Posts
1 - 5 of 5 Posts
Top