[torquenturbo]

Has anybody mounted a TPS sensor to a 4bt yet? I also need this as an input for a stand alone (TCI) trans controller to run a 4l60e. I figure a bracket on the IP somewhere.. just wondering if anybody has pics? or advice? Chris

 

[mcinfantry]

sure. let me see........

 

[mcinfantry]

this is how i did mine.

 

[torquenturbo]

Thanks!!! I didn't think of that!! I woke up this morning remembering 91-93 dodges 6bt's have a TPS bracket on their rotary pumps though.. think that bracket would bolt up to a rotary 4bt pump? Chris

 

[mcinfantry]

sure, but the tps i used cost 17 dollars. how much is a didge? how much is the bracket?

 

[Diesel Durango]

sure, but the tps i used cost 17 dollars. how much is a didge? how much is the bracket?

got any info on a 17 dollar tps? I guess it is just a potentiometer.

 

[torquenturbo]

The dodge unit with bracket is $599.00 bad idea unless someone has one used, or did a swap from auto 6bt into a manual truck and wants to sell the bracket ? Anybody know anybody???

 

[BobS]

Information on the Dodge Cummins TPS

How to replace the TPS with a potentiometer:
http://www.dieseltruckresource.com/dev/showthread.php?t=42003

Another article and with pictures:
http://www.dieseltruckresource.com/dev/showthread.php?t=142641

 

[torquenturbo]

Found one! Expensive...I think I'll imitate it though...just wanted to put this out there for anybody.

http://store.summitracing.com/partdetail.asp?autofilter=1&part=TCI-377400&N=115+311236&autoview=sku

 

[mcinfantry]

the tps is a camaro model#
the bracket i made. the linkage is from compushift.

 

[5kids]

Do not got with the Dodge unit if at all possible. I was always replacing the one on my first gen years ago. Let us know what you decide to use.

 

[50mod]

the tps is a camaro model#
the bracket i made. the linkage is from compushift.

I understand that this is a really old post but the part number you used is not there. I just need to know if I could use and tps or is there a certain way to set this up?