[fangoul]

Ok so the engine I got didn't come with a down pipe. The attached pic is what the backside of the turbo looks like.

Is this the flange to use? http://store.airflo.com/ad311.html

And what kind of clamp goes with that?

Thanks,

Andy

 

[kaptar]

Its called a V-clamp.

 

[fangoul]

Does it look like this turbo uses just a standard V-clamp? I found that flange that's supposed to be for a Dodge application but I don't know if that is different than a regular V-clamp.

 

[tndonor]

I used that flange with a regular v clamp

 

[fangoul]

That's what I needed to hear

Thanks

 

[mcinfantry]

that WILL NOT FIT. how do i know? i bought one. ill sell it to you CHEAP

this one is the one that will
http://store.airflo.com/88-300.html

 

[fangoul]

So it is just a standard V-clamp flange then. Thanks :beer:

 

[tndonor]

McInfantry,
Just curious why it didnt work for you. I should have stated I have an HX30 turbo, if the makes a difference. Standard Vclamp has held it to the turbo no leaks for 6 weeks now.

 

[mcinfantry]

the cummins one is too big (4"?). the other one i posted is 3"

 

[tndonor]

I didnt see the measurements....... need to quit working this much.

I then retract and edit that I used the 3" as McInfantry has pointed out. You do not get into the four inch until the HX35, correct?

 

[66gaza]

AFAIK HX35 is 3" and the HX40 is 4".

Gaza